| 02-26-2017, 05:00 PM | #1 |
|
Second Lieutenant
 29
Rep 256
Posts |
JB4 Code
So ever since I got the JB4 I throw a code about once a week. The only way I've found to get rid of the code is to go to map 0 and not drive the car for a few hours and that seems to do the trick. Up until getting the Bluetooth connect a couple weeks ago I had no idea what the code was but now I see it's 194201. Anyone else run into this or have a solution?
__________________
2013 335i xdrive BSM Sportline: FBO (ER FMIC, catless DP, CP, TIC, AFE dry filter, JB4 Map 2 or 5), Dinan springs, Doss Wheels (19x8.5), DWSO6 255/35/19, M4 Style Rear Spoiler, M Grille, Painted Whiskers/Front Reflectors
Previous: 2006 330i (stock), sold at 152k miles after 10.5 years |
| 02-26-2017, 09:23 PM | #2 |
|
First Lieutenant
101
Rep 316
Posts |
I've gotten both the tuner codes especially if I get on it too often....from the initial research I did, a lot of the actual tuners said don't worry about it. The leakage one I have no idea, but if you want further diagnosis, take a log in 4th gear and post to the Log thread in N54tech.com it is a very helpful resource.
|
|
Appreciate
0
|
| 02-26-2017, 09:30 PM | #3 |
|
Colonel
 1268
Rep 2,957
Posts |
The first 3 say to ignore. The last is the vacuum switch by the fuel pump malfunctioning
__________________
2015 335i Msport/6 JB4/EWG/E30/VRSF DP/ER CP/ VRSF Race Exhaust/ Injen Intake/Verde Axis 19x8.5/9.5 245/35/275/30 Conti Extreme CS/ H&R Sports / Motorsport Hardware Stud Conversion
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
