6WB coding tread

sherif atta · 12-24-2018, 10:43 AM

Hello all.. Need some help please, i installed a used 6wb cluster and its not identified via any software, the MOST is connected.
Any recommendations?

atzebmw · 12-24-2018, 11:24 AM

Quote:

Originally Posted by sherif atta

Hello all.. Need some help please, i installed a used 6wb cluster and its not identified via any software, the MOST is connected.
Any recommendations?

I'm not sure if a used 6WB will work.
But you mean you can't see it in E-Sys?
Then change the VO to 6WB an first code the HU with it.
Then the 6WB (DKombi) should be visible.

sherif atta · 12-24-2018, 11:40 AM

Quote:

Originally Posted by atzebmw

I'm not sure if a used 6WB will work.
But you mean you can't see it in E-Sys?
Then change the VO to 6WB an first code the HU with it.
Then the 6WB (DKombi) should be visible.

Yes i cant see it using Esys, i changed the VO adding 6WB but didn't do the HU coding.. Could you tell me what to do to code it?

atzebmw · 12-24-2018, 11:43 AM

Quote:

Originally Posted by sherif atta

Yes i cant see it using Esys, i changed the VO adding 6WB but didn't do the HU coding.. Could you tell me what to do to code it?

Only hit the button "Code" (right beside FDL code).

sherif atta · 12-25-2018, 05:31 AM

Quote:

Originally Posted by atzebmw

Only hit the button "Code" (right beside FDL code).

It didnt work after coding also.. Any other thoughts?

atzebmw · 12-25-2018, 06:05 AM

Quote:

Originally Posted by sherif atta

It didnt work after coding also.. Any other thoughts?

Did you try both possibilities? "Read SVT (VCM)" and "Read Ecu"?
Do you still see the old 6WA cluster in the SVT list?

Ibo24 · 12-25-2018, 10:11 AM

Try changing the built year to 11/16.

sgimips · 01-18-2019, 08:33 AM

I’ve been running with my 6WB retrofit for a few months now and all is well, mostly. I have the navigation info clipping in the center with certain directions (round abouts or complicated intersections mostly) and an error code for “MOST node: the default registry is outdated” which doesn’t seem to affect anything but would be nice to fix if anyone knows how to update that.

Also is it possible to code the fuel range graph so it shows static numbers (like 0 and 200 in the middle) rather than showing the range following the end of the bar graph?

Skyhigh · 01-18-2019, 02:03 PM

You already have the fuel gauge in the circle to the left.
The scale right of it is range. Or am I misunderstanding your thought?

sgimips · 01-18-2019, 06:50 PM

Quote:

Originally Posted by Skyhigh

You already have the fuel gauge in the circle to the left.
The scale right of it is range. Or am I misunderstanding your thought?

Correct. The scale on the speedometer side shows the range as a graph with the miles as a number which follows the end of the graph. I wondered if it could be changes so that the numbers are shown in a fixed location on the graph, sort of like how the mpg graph is displayed on the right side of the cluster.

Skyhigh · 01-18-2019, 07:22 PM

Still don't understand why you would want that, but either way it is not possible through coding.

ZECAR33 · 01-22-2019, 05:13 PM

Quote:

Originally Posted by shawnsheridan

FDL Code theese:

CIC => KOMBI_CIC = kombi_high
DKOMBI => NAVI_NBT_ENABLE = kein_nbt

--------------------------------------------------------------------------------

hello, I made kombi retrofit for 6WB I added 6WB to FA and coded HU_nbt evo and kombi everything works fine but oil temperature and diesel do not work well. when I turn off the ignition the diesel does not come to zero is a 1/3 and the temperature seems to be the opposite wronf side pointer. will it be some coding or do I have to also add the FEM ICM etc …

i filling full up the pointer marks out the scale, analyzing well the pointer always points to 1/3 higher what should mark with the car off should point to zero points to wrong to 1/3 above when full fil points 1/3 off range

The oil temperatura pointer are on wrong direction (like a mirror)

see pictures

https://f30.bimmerpost.com/forums/sh....php?t=1553764

ZECAR33 · 01-22-2019, 05:14 PM

Quote:

Originally Posted by chp10

Hi,

because some of us installed already the 6WB Kombi i would like to start this tread. Here you can share your experience and findings with us.

Some of you asked me for the compass function. This can be found in section

3003 FZG Ausstattung -> Kompass Graph Enable -> set to aktiv.

I found also Motorleistung Enable which should show the engine power used (only workingin sportmodus). Unfortunately it is not working in my car. Maybe someone can try it and confirm. As it seems it is working at least for the F10 series cars.

In my 2013 F31 is still the HUD not working, i guess a coding mistake (resolution, wrapping...?), so if someone can help me would be nice.

hello, I made kombi retrofit for 6WB I added 6WB to FA and coded HU_nbt evo and kombi everything works fine but oil temperature and diesel do not work well. when I turn off the ignition the diesel does not come to zero is a 1/3 and the temperature seems to be the opposite wronf side pointer. will it be some coding or do I have to also add the FEM ICM etc …

i filling full up the pointer marks out the scale, analyzing well the pointer always points to 1/3 higher what should mark with the car off should point to zero points to wrong to 1/3 above when full fil points 1/3 off range

The oil temperatura pointer are on wrong direction (like a mirror)

see pictures

https://f30.bimmerpost.com/forums/sh....php?t=1553764

AndreiRRR · 01-23-2019, 01:20 PM

I have a problem with the street name not being displayed correctly on my retrofitted 6WB with NBT (see picture).

Tried the solution quoted below and it doesn’t work:

Quote:

Originally Posted by chp10

As far as i remember you have to change HU_NBT coding. There is a something like Guiding_Kombi_HUD and you have to change it to Rueko mit HUD

Someone can help?

hanselfransel · 01-23-2019, 05:19 PM

Quote:

Originally Posted by AndreiRRR

I have a problem with the street name not being displayed correctly on my retrofitted 6WB with NBT (see picture).

Tried the solution quoted below and it doesn’t work:

Someone can help?

Try this
KOMBI_Aufloesung - Aufloesung_1
HUD_Komprimierung_Art - RLE 1

jdgay22 · 01-23-2019, 10:06 PM

does anyone know the code to make the 6wb stay in sports display mode. while even in comfort or eco.... I really just wanted it for the big digital read out.. dont want to always drive in sport.. mines is a retro fit

Skyhigh · 01-24-2019, 01:38 AM

No such code as far as I am aware.

AndreiRRR · 01-24-2019, 02:39 AM

Quote:

Originally Posted by hanselfransel

Try this
KOMBI_Aufloesung - Aufloesung_1
HUD_Komprimierung_Art - RLE 1

Forgot to mention that I don’t have HUD. Do I have to use the same codes?

KimHaugli · 01-24-2019, 04:59 AM

Quote:

Originally Posted by KDKE30

Hey, do you find a way to increase the splash screen time?

Have been searching everywhere for the same. I think the duration of the startup logo is fixed and cannot be changed.

It sucks, if I want to see the M550D logo i need to rush into the car before it dissapears..

hanselfransel · 01-24-2019, 03:22 PM

Quote:

Originally Posted by AndreiRRR

Forgot to mention that I don’t have HUD. Do I have to use the same codes?

Yes, i don t have hud too, and worked for me

AndreiRRR · 01-26-2019, 05:34 PM

Quote:

Originally Posted by hanselfransel

Try this
KOMBI_Aufloesung - Aufloesung_1
HUD_Komprimierung_Art - RLE 1

It works!!!

Thank you!

hanselfransel · 01-27-2019, 12:34 PM

Quote:

Originally Posted by AndreiRRR

It works!!!

Thank you!

No prob

12-24-2018, 10:43 AM	#111
sherif atta New Member 0 Rep 6 Posts Drives: f30 340i Join Date: Nov 2018 Location: egypt iTrader: (0)	Hello all.. Need some help please, i installed a used 6wb cluster and its not identified via any software, the MOST is connected. Any recommendations?
	Appreciate 0 Quote

12-25-2018, 10:11 AM	#117
Ibo24 New BMW owner 139 Rep 621 Posts Drives: BMW 316d, BMW F40 116d Join Date: Jan 2012 Location: Belgium iTrader: (0) Garage List 2014 BMW 316d F30 [0.00]	Try changing the built year to 11/16.
	Appreciate 0 Quote

01-18-2019, 08:33 AM	#118
sgimips Private 23 Rep 66 Posts Drives: '18 540d Join Date: Jul 2016 Location: San Diego, CA iTrader: (0)	I’ve been running with my 6WB retrofit for a few months now and all is well, mostly. I have the navigation info clipping in the center with certain directions (round abouts or complicated intersections mostly) and an error code for “MOST node: the default registry is outdated” which doesn’t seem to affect anything but would be nice to fix if anyone knows how to update that. Also is it possible to code the fuel range graph so it shows static numbers (like 0 and 200 in the middle) rather than showing the range following the end of the bar graph?
	Appreciate 0 Quote

01-18-2019, 02:03 PM	#119
Skyhigh Brigadier General 1879 Rep 3,860 Posts Drives: BMW F36 Join Date: Apr 2018 Location: Europe iTrader: (0)	You already have the fuel gauge in the circle to the left. The scale right of it is range. Or am I misunderstanding your thought? __________________ "Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
	Appreciate 0 Quote

01-18-2019, 07:22 PM	#121
Skyhigh Brigadier General 1879 Rep 3,860 Posts Drives: BMW F36 Join Date: Apr 2018 Location: Europe iTrader: (0)	Still don't understand why you would want that, but either way it is not possible through coding. __________________ "Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
	Appreciate 0 Quote

01-23-2019, 10:06 PM	#126
jdgay22 Enlisted Member 12 Rep 47 Posts Drives: 428i f33 m sport convertible Join Date: Dec 2018 Location: los angeles iTrader: (0)	does anyone know the code to make the 6wb stay in sports display mode. while even in comfort or eco.... I really just wanted it for the big digital read out.. dont want to always drive in sport.. mines is a retro fit
	Appreciate 0 Quote

01-24-2019, 01:38 AM	#127
Skyhigh Brigadier General 1879 Rep 3,860 Posts Drives: BMW F36 Join Date: Apr 2018 Location: Europe iTrader: (0)	No such code as far as I am aware. __________________ "Large increases in cost with questionable increases in performance can be tolerated only in cars and women."
	Appreciate 0 Quote