02-25-2021, 09:20 AM | #1 |
New Member
0
Rep 13
Posts |
Hi there!
I'm following this forum a long time and always finding my questions. This time I can't find the solution for my problem. I'm retrofitting my cluster to 6WA. The 6WA was a used one and I need to delete the VIN and set the mileage to 0. I already set the mileage to 0 km but I don't know how the find the old VIN number on the BIN file. I saw on the internet a couple of messages about finding it with HEX but I can't find how. I also don't know the old VIN number so it makes it a bit more difficult. I'm using R270+ programmer with a SOIC clip. Everything works well. I got ESYS for coding the cluster (maybe you can also write something about coding this too). I have attached the BIN file to this post. Link to BIN file: https://wetransfer.com/downloads/fe5...5151656/40fbb1 Edit: Problem solved. The cluster was already on 0.. and you saw the vin number on the emulator. Deleted the short vin. |
02-26-2021, 12:22 AM | #2 | |
Private
77
Rep 81
Posts |
Quote:
|
|
Appreciate
0
|
02-26-2021, 12:40 AM | #3 |
New Member
0
Rep 13
Posts |
dbright03
Thank you for your respons. I saw this guide and have used it. But the writer of this guide refers to lines to set a value with FF.. Those are 30 or are 00 in my 160D0WQ.. How can I see what the VIN number is. I'm using EEPROM R270+. |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bmw, cluster, f30, instrumentcluster, odometer, retrofit |
|
|