03-25-2020, 01:01 PM | #1 |
Lieutenant
170
Rep 468
Posts |
is possible to shrink PZDSdata to flash F30 only
As above, can full pszdata be reduced to allow some space if you only intend on flashing one type of chassis?
If anyone knows how, please advice. Many Thanks |
03-27-2020, 04:39 PM | #2 |
Lieutenant
170
Rep 468
Posts |
|
Appreciate
0
|
03-27-2020, 05:50 PM | #3 | |
Colonel
588
Rep 2,302
Posts |
Quote:
You can delete the series you don't need from the "mainseries" folder, but that doesn't create much free space. The only way I see would be to do a TAL calculation. Then you can see the required files (BTLD, CAFD, IBAD, SWFL) in the SVT table. In theory, you can then delete all other files from these folders. But I would not delete too much because you do not know whether the program might still need a few additional files. The folder psdzdata / swe / swfl occupies the most space. I would delete at least the largest files (except the required ones) from this folder. |
|
Appreciate
1
xpro170.00 |
Post Reply |
Bookmarks |
|
|