"The coding data could not be read" after successful code with Bimmercode

5mall5nail5 · 10-29-2018, 06:27 PM

Hey all - have an email into support but thought I'd check with everyone here first. I coded to fold mirrors with key (and unfold with unlock). Afterwards it worked fine! Everything is fine, in fact. However, I wanted to see about setting the blinker to more links (vs. 3) so went back in a few hours later and now I get:

Kind of concerned - everything works properly otherwise and it can read other modules. Should I try and do a restore?

Thanks!

5mall5nail5 · 10-29-2018, 07:16 PM

Ugh - did a restore, it said it wrote the restore... but still get the same error. It seems to be JUST for "Front Electronic Module" - the mirrors no longer fold holding the key lock so it definitely reset those settings. Any advice here?

There are several restore files on my phone but I'm not sure if they're different versions or what. Bimmercode doesn't offer me options when restoring

Steakpizza · 10-29-2018, 08:18 PM

Try emailing them. They are super helpful with problems and very prompt with stuff too.

5mall5nail5 · 10-29-2018, 09:11 PM

Quote:

Originally Posted by Steakpizza

Try emailing them. They are super helpful with problems and very prompt with stuff too.

I just did - it sent logs to them. Hopefully they can sort it out.

Ibo24 · 10-30-2018, 12:52 PM

Your FEM_BODY is probably corrupted, try to restore with ESYS.

5mall5nail5 · 10-30-2018, 01:53 PM

Quote:

Originally Posted by Ibo24

Your FEM_BODY is probably corrupted, try to restore with ESYS.

So - turns out, my wifes Samsung S9 read it fine. I reached out to Bimmercode and they said to uninstall/reinstall the app. I copied the backups to google drive, uninstalled, reinstalled, and all good.

10-29-2018, 06:27 PM	#1
5mall5nail5 Not stock 474 Rep 614 Posts Drives: E34 525i Turbo Join Date: Oct 2008 Location: PA iTrader: (0)	"The coding data could not be read" after successful code with Bimmercode Hey all - have an email into support but thought I'd check with everyone here first. I coded to fold mirrors with key (and unfold with unlock). Afterwards it worked fine! Everything is fine, in fact. However, I wanted to see about setting the blinker to more links (vs. 3) so went back in a few hours later and now I get: Kind of concerned - everything works properly otherwise and it can read other modules. Should I try and do a restore? Thanks! __________________ 2015 BSM 328i Sport Line - BSM 2015 BSM X1 M Sport - BSM 1992 525i 1987 325e
	Appreciate 0 Tweet Quote

10-29-2018, 07:16 PM	#2
5mall5nail5 Not stock 474 Rep 614 Posts Drives: E34 525i Turbo Join Date: Oct 2008 Location: PA iTrader: (0)	Ugh - did a restore, it said it wrote the restore... but still get the same error. It seems to be JUST for "Front Electronic Module" - the mirrors no longer fold holding the key lock so it definitely reset those settings. Any advice here? There are several restore files on my phone but I'm not sure if they're different versions or what. Bimmercode doesn't offer me options when restoring __________________ 2015 BSM 328i Sport Line - BSM 2015 BSM X1 M Sport - BSM 1992 525i 1987 325e Last edited by 5mall5nail5; 10-29-2018 at 07:42 PM..
	Appreciate 0 Quote

10-29-2018, 08:18 PM	#3
Steakpizza Second Lieutenant 118 Rep 293 Posts Drives: 320i Join Date: May 2018 Location: Philadelphia iTrader: (0)	Try emailing them. They are super helpful with problems and very prompt with stuff too.
	Appreciate 0 Quote

10-30-2018, 12:52 PM	#5
Ibo24 New BMW owner 139 Rep 621 Posts Drives: BMW 316d, BMW F40 116d Join Date: Jan 2012 Location: Belgium iTrader: (0) Garage List 2014 BMW 316d F30 [0.00]	Your FEM_BODY is probably corrupted, try to restore with ESYS.
	Appreciate 1 AndrewC198910931.00 Quote