02-18-2021, 06:40 PM | #1 |
First Lieutenant
87
Rep 379
Posts |
Solved. Seats installed! Looking for handy electrician in Houston or Texas.
Update. Was able to to it by myself, so front seats from 650 are now installed and wired in my 435. See below.
Hi! I have bmw 435 2014 and would want to replace front seats with a pair from 650. Not sure if coding is the only one what would be needed for a driver seat, but for passenger seat, as it does not have memory in stock and a new one does have, a k-can bus (two cables), would need to be added as well. I have all electrical schemas to support. Looking for help to wire new seats and code/clear airbag errors. Could drive from Houston to a shop if any. P.S. I also ordered an original wire harness from 650 for these seats to replace my own if any. Last edited by Kolianovskyi; 03-18-2021 at 03:15 PM.. Reason: Solved a problem. Mistype. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|