PSdZData Full vs. Lite

shawnsheridan · 02-11-2019, 04:06 PM

Quote:

Originally Posted by sea_m235i

I am looking to code a F22 LCI cluster to a pre-LCI car. Do you (or anyone) know if the full data file is required to code that ECU?

Having done the FZD ECU coding when I did my alarm retrofit, I wouldn't think so - but another member on a different forum said I would.

As always, thanks for your wealth of knowledge Shawn!

If you can make it work with just Coding, then only Lite is needed. If you end up needing to Program ECU, then you will need Full. I cant predict how yours turns out.

plurant · 02-12-2019, 07:48 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Yes, all ECU, and token not required for flashing.

Thank you !

How long does updating all ecus take ? What is better, individual update or full istep upgrade ? What happens if flashing an ecu fails, is it soft or hard bricked ?

I want to make sure i dont screw anything up while updating 6 years old software (2012 istep)

shawnsheridan · 02-12-2019, 09:44 AM

Quote:

Originally Posted by plurant

Thank you !

How long does updating all ecus take ? What is better, individual update or full istep upgrade ? What happens if flashing an ecu fails, is it soft or hard bricked ?

I want to make sure i dont screw anything up while updating 6 years old software (2012 istep)

Update time varies, based on how old current firmware is versus new firmware, and the number of updates needed to bring current. Around 3 hours to program entire car would not be uncommon.

As for Individual or Full Update, Full update would always be better as it would account for all dependencies. That said, I don't update anything without good reason to in first place ( i.e. Bug Fix, Feature Added, etc.).

If ECU Fails, can be soft brick or hard bricked. Impossible to predict.

plurant · 02-12-2019, 10:43 AM

Quote:

Originally Posted by shawnsheridan

Update time varies, based on how old current firmware is versus new firmware, and the number of updates needed to bring current. Around 3 hours to program entire car would not be uncommon.

As for Individual or Full Update, Full update would always be better as it would account for all dependencies. That said, I don't update anything without good reason to in first place ( i.e. Bug Fix, Feature Added, etc.).

If ECU Fails, can be soft brick or hard bricked. Impossible to predict.

As for new features i dont know if they added some for my old cic/combox unit, but i would like to update it to see if it solves my audio lag issue with bluetooth. I also have an issue that whenever i use the automatic wipers, the cruise control becomes a little heistant sometimes (2-3 minutes intervals and it triggers my ocd), i'm loosing 2-3km/h then becoming stable again imediately (weird issue i know but after testing i'm sure it comes from when the auto wipers are on).
And last i would like to update my Fem to be able to set MAPPING_NEBELSCHW_X_PWM_LEVEL_1 to "100%" because current fw version only has voltage level option as 5A1 led fogs where not available before lci, and this might be the reason why i get residual glow on my retrofited led fog lights. (i could add led drivers but this would be too easy and take the fun away

)

Edit: also when using cruise control the green indicator is off the actual speed by 2-3km/h but only when the outside temp is under 5 degres celsius (another weird bug lol)

shawnsheridan · 02-12-2019, 10:44 AM

Quote:

Originally Posted by plurant

As for new features i dont know if they added some for my old cic/combox unit, but i would like to update it to see if it solves my audio lag issue with bluetooth. I also have an issue that whenever i use the automatic wipers, the cruise control becomes a little heistant sometimes (2-3 minutes intervals and it triggers my ocd), i'm loosing 2-3km/h then becoming stable again imediately (weird issue i know but after testing i'm sure it comes from when the auto wipers are on).
And last i would like to update my Fem to be able to set MAPPING_NEBELSCHW_X_PWM_LEVEL_1 to "100%" because current fw version only has voltage level option as 5A1 led fogs where not available before lci, and this might be the reason why i get residual glow on my retrofited led fog lights. (i could add led drivers but this would be too easy and take the fun away

)

Ok, good luck with it.

plurant · 02-13-2019, 12:56 PM

Quote:

Originally Posted by shawnsheridan

Ok, good luck with it.

I will go for full update i think, what version of esys would you reccomend ?

shawnsheridan · 02-13-2019, 01:02 PM

Quote:

Originally Posted by plurant

I will go for full update i think, what version of esys would you reccomend ?

3.27.1.

harkes · 02-14-2019, 05:33 AM

My car was born without Launch Control (J039619) which was available on later models. Any chance I might be able to add this feature with a newer Istep? I suspect it cannot be coded as the option was now available at that time...

Darth Vader · 02-20-2019, 09:20 PM

Hi Shawn, could you please send me the links to the latest e-sys and PSdZData?

shawnsheridan · 02-20-2019, 09:27 PM

Quote:

Originally Posted by Darth Vader

Hi Shawn, could you please send me the links to the latest e-sys and PSdZData?

PM sent.

shawnsheridan · 02-21-2019, 10:12 AM

Quote:

Originally Posted by mflorizi

Hi Guys, is possible install e-sys with windows 10, works perfect ?

Thanks,
Mflorizi

Asked and Answered:

https://f30.bimmerpost.com/forums/sh...ostcount=14274

mribaut · 02-23-2019, 05:13 PM

Hi Shawn

Could you please send me the latest PSdZData Full for my 14/F31.

Thanks,

shawnsheridan · 02-23-2019, 06:18 PM

Quote:

Originally Posted by mribaut

Hi Shawn

Could you please send me the latest PSdZData Full for my 14/F31.

Thanks,

PM sent.

mzex · 03-04-2019, 04:15 AM

Hi Shawn, could you please send me link for latest PSDZData Full?

Thanks

shawnsheridan · 03-04-2019, 06:13 AM

Quote:

Originally Posted by mzex

Hi Shawn, could you please send me link for latest PSDZData Full?

Thanks

PM sent.

mzex · 03-04-2019, 06:16 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thank you very much!

crisuletz · 03-05-2019, 02:22 AM

Could you send me the link to the Lite version. Thanks in advance.
Esys & psdzdata ?

shawnsheridan · 03-05-2019, 07:05 AM

Quote:

Originally Posted by crisuletz

Could you send me the link to the Lite version. Thanks in advance.
Esys & psdzdata ?

PM sent.

bart91 · 03-12-2019, 06:50 AM

Hello

Can I have a link to the full data?
Thank You!

shawnsheridan · 03-12-2019, 07:03 AM

Quote:

Originally Posted by bart91

Hello

Can I have a link to the full data?
Thank You!

PM sent.

FrederikD · 03-14-2019, 04:14 AM

Can I get a link for the Lite data please?
I have the 3.27.1.

atzebmw · 03-14-2019, 04:33 AM

Quote:

Originally Posted by FrederikD

Can I get a link for the Lite data please?
I have the 3.27.1.

See point 2: Software Installation

https://www.bimmerfest.com/forums/sh...d.php?t=983244

02-14-2019, 05:33 AM	#778
harkes Colonel 1078 Rep 2,358 Posts Drives: M135i, E39 M5, NSX and AE86 Join Date: Apr 2014 Location: Xiamen, China iTrader: (0)	My car was born without Launch Control (J039619) which was available on later models. Any chance I might be able to add this feature with a newer Istep? I suspect it cannot be coded as the option was now available at that time... __________________ M135i 8AT PWG, MHD, Pure Stage2, WMI via Torqbyte CM5-LT, Custom tuned by PureBoost (A Dane in China)
	Appreciate 0 Quote

02-20-2019, 09:20 PM	#779
Darth Vader New Member 0 Rep 22 Posts Drives: 2019 BMW X5 40i Join Date: Aug 2013 Location: Miami, FL iTrader: (0)	Hi Shawn, could you please send me the links to the latest e-sys and PSdZData?
	Appreciate 0 Quote

02-23-2019, 05:13 PM	#782
mribaut Registered 0 Rep 2 Posts Drives: 2014 BMW F31 Join Date: Feb 2019 Location: CA iTrader: (0)	Hi Shawn Could you please send me the latest PSdZData Full for my 14/F31. Thanks,
	Appreciate 0 Quote

03-04-2019, 04:15 AM	#784
mzex Registered 0 Rep 3 Posts Drives: BMW F06 640D Join Date: Nov 2018 Location: Slovenia iTrader: (0)	Hi Shawn, could you please send me link for latest PSDZData Full? Thanks
	Appreciate 0 Quote

03-05-2019, 02:22 AM	#787
crisuletz Registered 1 Rep 3 Posts Drives: BMW f10 520 LCI Join Date: Mar 2019 Location: Romania iTrader: (0)	Could you send me the link to the Lite version. Thanks in advance. Esys & psdzdata ?
	Appreciate 0 Quote

03-12-2019, 06:50 AM	#789
bart91 New Member 0 Rep 11 Posts Drives: F31 2014 318D Join Date: Jan 2018 Location: Deutschland iTrader: (0)	Hello Can I have a link to the full data? Thank You!
	Appreciate 0 Quote

03-14-2019, 04:14 AM	#791
FrederikD New Member 5 Rep 29 Posts Drives: BMW F31 Join Date: Jan 2019 Location: Belgium, Gent iTrader: (0)	Can I get a link for the Lite data please? I have the 3.27.1.
	Appreciate 0 Quote