[vera]

I have an xdrive 340i, and I'm looking for some wheels and tires. at the moment, I have my eyes on 437m's.

the setup I'm looking to run is pretty meaty all around as I have around 650whp. (19x9 245/35/R19 | 19x10 285/30/R19)

The difference is 0.4%. is this okay for my vehicle?

As always, open to suggestions for Rims and criticism.

[morritse]

I honestly wanted to go staggered at first but decided that squared was easier. I didn't want to worry about Xdrive shit and uneven wear etc. I think you'll have trouble fitting a 10 inch wheel in the back.


I decided to just to with 18x9 et30 with 245/40/18s all around. I think I could have gone with 255s instead without any issue. 19s look better but 18s are better in pretty much every other way. I'm lowered on KW v2s and I love the fitment for a street car. I think the consensus is that 265/235 is the right fitment if you want to go staggered.

[Icarium81]

If only there was a whole section of the forum to ask such questions.....

[Icarium81]

Originally Posted by alohasurftoad

do you mean a [Wheels and Tires sub-forum], like this?
https://f30.bimmerpost.com/forums/fo...play.php?f=423

that might contain a thread such as this?
https://f30.bimmerpost.com/forums/sh....php?t=1020367

in which, it might contain posts such as these, 437M with 245/35+285/30, along with other size combinations?
https://f30.bimmerpost.com/forums/sh...5&postcount=20
https://f30.bimmerpost.com/forums/sh...&postcount=201
https://f30.bimmerpost.com/forums/sh...&postcount=290
https://f30.bimmerpost.com/forums/sh...&postcount=321

yes, if only there was...

WAAAAYYY more effort in your post than mine lol, if only the OP wasn't so lazy. Or to use the search function...