11-03-2024, 02:36 PM | #662 |
Captain
181
Rep 644
Posts |
Check this all settings and see if help you
;DKMOBI NAVICOLOR_TABLE=farbwelt_id5 ;HU_NBT2 KOMBI_CIC=kombi_high KOMBI_AUFLOESUNG=aktiv MFID_KOMBI_VARIANT=nicht_aktiv HUD_AUFLOESUNG=aufloesung_1 HUD_KOMPRIMIERUNG_ART=rle_1 NAVI_HUD_AVAILABLE=aktiv
__________________
Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH and IHKA3
|
Appreciate
0
|
11-08-2024, 12:13 PM | #663 |
Registered
0
Rep 4
Posts |
If I wasn't clear it worked with kein_nbt to have the navigation directions shown.
But sometimes the language switches automatically to the cluster's default language and I have to go into HU normal settings to set it back to English UK. |
Appreciate
0
|
12-02-2024, 03:34 PM | #664 |
Registered
0
Rep 5
Posts |
Hello. I’d like to ask is there something which could make the oil gauge on the 6wb on my F10 to stay precisely at 12 o’clock when at operating temp? Because when I compare the oil temp reading from the hidden menu the oil gauge correctly starts to move at 50C and but when the oil reading is at 90ishC the gauge is already past 12 o’clock. I am running a BMS oil cooler valve and I know for a fact that the car is not overheating. Is there a way to code/reset the oil gauge. I was contemplating to run the “system test” from the hidden menu but I am afraid since the cluster is not original something might go wrong.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|