[Atomiczen]

my new F32 with 19x8.5 19x9.5 bcforged in custom offset.
perfect stock body fitment, car lowered with eibach springs
sorry for the bad picture

[TheFanatic]

I really need to get some updated pictures of my car, until then, this will do fine. 255/35/19 +33 square on x-drive

[avinator72]

Originally Posted by 440_JS

Judd T325 Gloss Gunmetal

8.5 x 19 ET 30
9.5 x 19 ET 34

Michelin Pilot Sport 4 225/40
Michelin Pilot Sport 4 255/35

60mm non-genuine wheel caps

Are you on the stock suspension? If so, did you notice any change in the way the wheel gap looks?

Thanks.

[prohumanitate]

VMR V703 in gunmetal, Front 8.5 ET 40 (w/ 5mm spacers) 235/40 19, Rear 9.5 ET 45 265/35 19. Stock M-Sport suspension

[Galip1993]

Hello everybody, I have a quick question regarding Wheel/tire size. I don’t have much knowledge regarding f30 wheels/tire size fitments.

Is this size,

Wheel size: 19x8.5 ET 35 (front). Tire size: 225/40/19.
Wheel size: 19x9.5 ET 35 (rear). Tire size: 255/35/19.
too big of a setup for a F30 with h&r sport lowering springs? I don’t want to roll my fender or alter my car too much just to fit wheels. If anybody has a similar setup, let me know.

[Classydingo]

Hi Folks, I'm interested in getting a set of HRE FF04 in 19" size. I've got a 440i GC on stock suspension. From all the reading I've done on here, it seems like not too many folks are running the FF04 in the 19" fitment besides Sayzar.

Does anyone have any recommendations as to the wheel and tire size required?

My understanding is the following:
F: 19x8.5et 30
R: 19x9.5et 42

The HRE guy I spoke to said that I should run F: 235/45R19, R: 265/40R19 in order to not change the rolling diameter of the wheel. My current wheels are 225/45R18. This is a 5% difference in diameter, wouldn't this mess up my speedo and other sensors?

Thanks

[alohasurftoad]

Originally Posted by Classydingo

I'm interested in getting a set of HRE FF04 in 19" size. I've got a 440i GC on stock suspension. Does anyone have any recommendations as to the wheel and tire size required?

F: 19x8.5et 30
R: 19x9.5et 42

The HRE guy I spoke to said that I should run F: 235/45R19, R: 265/40R19

the HRE guy is incorrect. you need to run 235/40/19, 265/35/19. alternately you can run 245/35/19, 255/35/19 but it would look better with slight lowering. the girthiest you can try is 245/40/19, 275/35/19 however the front may rub the fenderwell liner while turning at full lock and the rear will be bulging slightly since 9" is the minimum for a 275/40.

.

[Horn High Aces]

Originally Posted by Classydingo

Hi Folks, I'm interested in getting a set of HRE FF04 in 19" size. I've got a 440i GC on stock suspension. From all the reading I've done on here, it seems like not too many folks are running the FF04 in the 19" fitment besides Sayzar.

Does anyone have any recommendations as to the wheel and tire size required?

My understanding is the following:
F: 19x8.5et 30
R: 19x9.5et 42

The HRE guy I spoke to said that I should run F: 235/45R19, R: 265/40R19 in order to not change the rolling diameter of the wheel. My current wheels are 225/45R18. This is a 5% difference in diameter, wouldn't this mess up my speedo and other sensors?

Thanks

Do you happen to know if HRE has these in stock in the Taramac finish? I inquired about a set earlier this year for my 440 GC and was told they were out of stock and uncertain if/when they'd have them again.

[Sayzar]

Originally Posted by Horn High Aces

Do you happen to know if HRE has these in stock in the Taramac finish? I inquired about a set earlier this year for my 440 GC and was told they were out of stock and uncertain if/when they'd have them again.

Not sure

[Horn High Aces]

Originally Posted by Sayzar

Not sure

Sorry, that was directed to Classydingo

[Classydingo]

Originally Posted by Horn High Aces

Sorry, that was directed to Classydingo

Not sure. I've been looking at M0dbargain's website. As far as HRE claims, they don't have a 19" fitment for the FF04 .

Thanks for the help guys. I will order soon and post an update if I figure it out!

[navid0308]

Got these today!! Super happy with the way it looks. 235/40/19 squared setup.

I am on m-sport suspension.

[estoril_335]

Apex ec7 anthracite 19x8.5, 9.5 et35,et43
Michelin ps4s 245/35, 275/30

Lowered with bilstein b14 coilovers

[silvrbreez]

BBS CI-R
19x8.5 +35 F w/ 225/40/19 Michelin Pilot Sport 4S
19x9.5 +40 R w/ 255/35/19 Micheline Pllot Sport 4S
Lowered on Dinan Springs

[JStrag3]

Originally Posted by Atomiczen

my new F32 with 19x8.5 19x9.5 bcforged in custom offset.
perfect stock body fitment, car lowered with eibach springs
sorry for the bad picture

Looks good!

[bigdnno98]

Originally Posted by silvrbreez

BBS CI-R
19x8.5 +35 F w/ 225/40/19 Michelin Pilot Sport 4S
19x9.5 +40 R w/ 255/35/19 Micheline Pllot Sport 4S
Lowered on Dinan Springs

How do you like the Dinan springs and did you get the Dinan bump stops too?

[silvrbreez]

Originally Posted by bigdnno98

How do you like the Dinan springs and did you get the Dinan bump stops too?

Yeah, I'm running the Dinan springs and bump-stops (aka "supplemental ride quality & handling kit"). It's been great for me, and I've been running this combo on the stock EDC shocks since January 2020 (probably about 12,000 miles). My car is driven daily. I like the drop since it's mild enough to both look good and avoid the scraping that I'd indefinitely face on a day-to-day basis. I'd also like to get the Dinan Shockware flash for the EDC to further take advantage of the setup.

[BCBMWF30]

19" HRE FF15 Stone Dark Clear
245x35x19
275x35x19
Stock Suspension

[FPJK]

Finally got some new shoes on my daily.

VMR V710's wrapped in Hankook Ventus V12 Evo2's

[Sigge]

Originally Posted by FPJK

Finally got some new shoes on my daily.

VMR V710's wrapped in Hankook Ventus V12 Evo2's

[IMG][/IMG]

Thinking of getting thoose tyres for my new wheels. Driven enough to make a statement?

[FPJK]

Originally Posted by Sigge

Thinking of getting thoose tyres for my new wheels. Driven enough to make a statement?

Have aout 1000 miles on them so far. They are great, I really like the grip and they for sure inspire confidence with the turn in. Only negative I found when researching is that the tread life isn't great compared the the competition.

With that being said I still love the MPSS that I have on my M3. I would say for the price the Hankooks are great!

[Sigge]

Originally Posted by FPJK

Have aout 1000 miles on them so far. They are great, I really like the grip and they for sure inspire confidence with the turn in. Only negative I found when researching is that the tread life isn't great compared the the competition.

With that being said I still love the MPSS that I have on my M3. I would say for the price the Hankooks are great!

Awesome, thats what i wanted to hear!

Hows the road feedback, are they noisy?