[Simon89]

Yes - I used E-Sys to code EBT and it was added.

[wilbur_the_goose]

Just got an app update yesterday. One of the updates had to do with "black panel instrument cluster coding"
Does anybody know what this does?

[Beachparty]

Would anyone have the cheat sheet for CIC units ?
I looked into Bimmercode but no luck so far…. there is a few lines with SMS ans email but it didnt work so far and I don't see office in Idrive.
EBT is now activated and working but no joy with SMS displaying in the car. The car has a combox

Anyone ?

[freespirit]

Thanks, everyone for the instructions in this post. Just coded for office and its working perfectly fine for Galaxy Note10 plus(emails, ,msgs, phone calls with contact pic). However for iPhone xs max, only the phone calls are working but not msg's and emails.

Anyone had success with Iphone? FYI enabled show notification option under bluetooh.

Thanks

[Holy_sweet_Jesus]

Originally Posted by DMM2

Hi everyone,

I just wanted to add a bit of info to this thread. I had just purchased a 2018 330i wagon, and while I was able to stream music via BT, I didn't have BMW Office functionality. I had tried the coding for 'HU_NBT' but it wasn't working properly. So I sent Stephan (the Bimmercode developer) an e-mail inquiring about coding office for 'HU_NBT_EVO'. The code he sent me works like a charm! 👍 See code below.

A huge thanks to board member Mkswoosh and Stephan from Bimmerpost for all of their help

try these for the NBT EVO:

HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > AUDIO_OFFSET = aktiv
HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > DAB_JOURNALINE = nicht_aktiv [Default]
HU_NBT_EVO > AUDIO_TUNER_TRAFFIC 3002 > MICROPHONE_NUMBER = wert_2
HU_NBT_EVO > EXBOX 3001 > USB_AVAILABLE = aktiv
HU_NBT_EVO > HMI 3000 > CDMM_AUX_SIMPLE_2 = nicht_aktiv
HU_NBT_EVO > HMI 3000 > CDMM_USB_COMPOSER_MSD = aktiv
HU_NBT_EVO > HMI 3000 > CDMM_USB_PORTS = usb1
HU_NBT_EVO > HMI 3000 > CDMM_USB_PORTS = usb1_sia
HU_NBT_EVO > HMI 3000 > OFFICE_MENUS_ACTIVE = aktiv
HU_NBT_EVO > SYSTEM_EINSTELLUNGEN 3004 > SOFTWARE_UPDATE_ASSISTANT = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > ADRESSBOOK = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_CAR_TYPE_IPOD_LOGO = bmw
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_MP4_ON_OFF = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_MSD_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > API_USB_VIDEO = none [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_NOTES_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_PLAYER_ON_OFF = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HFP = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > BT_MODUL_ON_OFF = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CE_DEVICE_SPEECH_RECOGNITION = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > CONTACTS_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_METADATA = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_CONFERENCE_CALL = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_OBJPUSH_MENUE = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_RESPONSE_HOLD = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_TYPE = internal_phone
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_AUDIO_NOTE = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_EMAIL = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_SMS = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_VOICE_EMAIL = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SMS_EIN_AUS = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > SWUP_SOURCE_USBMSCDD = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = nicht_aktiv [Default]
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv
HU_NBT_EVO > TELEFON_TELEMATIK_ONLINE 3003 > WLAN_DIAGNOSE = nicht_aktiv [Default]

So my I followed the above and office has been enabled, connected and disconnected both my BT phones but still can't connect both simultaneously. I have a 2016 435i , anyone have any ideas what I'm missing?

[CaliMark]

Thanks for all the info for unlocking BMW Office with bimmercode / e-sys

If i try this my end goal is to be able to sync a text message that has address information in it, will this be able to start the in car navigation the same way the connecteddrive messages can do that when you send the location from the bmw app. Can anyone that has unlocked this in a 428i pls let me know if you can launch navigation this way? I am trying to find a workaround before the Feb 2022 3g cutoff..

Thanks for the help and any information in advance.

CaliMark

[Ssjmarv]

Originally Posted by bacanski

So i grew some balls and tried code office and EBT at once with samsung s8

Used instruction from Stephan from Bimmercode. HUGE thanks for support.

Bluetooth stream works fine but i can only acces list that i have recently played and no art cover(have over 60gb in many folders).

Office is ON but can acces only contacts :/ no notification with text. No emails.

UPDATE: office is working absolutley fine. Just had to delete phone and configure bluetooth in settings.



HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > AUDIO_OFFSET = aktiv
HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > MICROPHONE_NUMBER = wert_2
HU_NBT > EXBOX 3001 > AUX1_IN_HU = wert_255 [Default]
HU_NBT > EXBOX 3001 > USB_AVAILABLE = aktiv
HU_NBT > HMI 3000 > CDMM_USB_AUDIO = all
HU_NBT > HMI 3000 > SVS = nicht_aktiv [Default]
HU_NBT > HMI 3000 > SYSTEM_TTS = nicht_aktiv [Default]
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > SOFTWARE_UPDATE_ASSISTANT = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ADRESSBOOK = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_CAR_TYPE_IPOD_LOGO = bmw
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_MP4_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_USB_VIDEO = none [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_NOTES_EIN_AUS = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_PLAYER_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HFP = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BT_MODUL_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CE_DEVICE_SPEECH_RECOGNITION = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACTS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > DATACOMM_CSIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > DUN_PROFILE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_BROWSING = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_IAP = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_METADATA = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EXTERNAL_CALL_LISTS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PAN_PROFILE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_CONFERENCE_CALL = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_OBJPUSH_MENUE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_RESPONSE_HOLD = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_TYPE = internal_phone
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_AUDIO_NOTE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_EMAIL = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_SMS = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_VOICE_EMAIL = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_SPEECH_TO_TEXT = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SMS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SWUP_SOURCE_USBMSCDD = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv

I was able to activate office successfully but there is no pop up notification or chime on idrive is there anyway to enable this?

[mannyhernz]

So this can all be done through bimmercode expert?

[babzie97]

Hello guys im so sorry to be posting a comment in a random post here. But im new here and I have a question about my bmw f30 320d and i cant find how can i post a new topic about my problem. Could anyone help me please ? 🥺🤦🏼‍♀️sorry and thank you