[IK6SPEED]

BIMMERPOST / Classifieds

Asking Price:

USD 1,000,000.00

Item Interest

OK. So $1,000,000 is ridiculous. These are just taking up space in my garage. 2020 Garage Cleaning. Willing to take reasonable offers.

S3 2 piece wheels

Purchased new for $8,570. $10k with tires.

6061-T6 Forged Aluminum

Hand Brushed Candy Black and Gloss Clear Finish. Exposed Gloss Black Hardware

19x9 ET 35 Front

19x10 ET 42 Rear

MPSS 245/40/19 8/32" Front
MPSS 275/35/19 6/32" Rear

formerly on a F30 lowered way too far right now.

About Velos S3:
http://www.velosdesignwerks.com/whee...forged-wheels/

For reference, the wheels are same at 437m at 19" with front at 9.0" and rear at 10.0"

ET in front is 35mm where 437m (and 666m) are 29mm, a difference of 6mm inward. If you feel this is an issue (it's not), you can use a 5mm spacer to make up the difference.

There is only 2mm difference in rear to 437m and 666m at 42 ET VS 40 ET.

The Front Drivers wheel has curb rash. Velos says they can rebuild as new for $695 (Nice part of the 2 part Design). You might have a repair place that can do it locally for less. Or they can repair and change finish of all 4 for $1500. Your choice.

You can end up with an essentially new set of Velos S3, normally $10k, for $1500 + what we agree on.

Again, only reason doing this is I need to clear room in the garage! I'd like to get my Bimmer back in there!

[sspade]

These are way outta my league but Im wondering... how much does an ultra high end aluminum wheel like this weigh in 19" ?

[IK6SPEED]

Originally Posted by sspade

These are way outta my league but Im wondering... how much does an ultra high end aluminum wheel like this weigh in 19" ?

Honestly, I don’t expect these to sell to a F3x owner. Sort of like Brembo GT Brakes.

They are much more common on F80 thread.

But posting here for a 1 in a million chance as these are rare 19” versions.

As for weight, no idea.

Here’s where they measured 20x11 in another thread. I obviously would assume 19” 9.5 and 10.0 to be lighter.

https://www.2addicts.com/forums/show....php?t=1114603

[bimmer4lif3]

Any pics of them on the car (side shots, offset side shot, rear end)? How is the concavity in the rear?

[IK6SPEED]

Originally Posted by bimmer4lif3

Any pics of them on the car (side shots, offset side shot, rear end)? How is the concavity in the rear?

http://www.velosdesignwerks.com/whee...forged-wheels/

The Velos Signature Series Wheel Collection of forged, concave profile, one-piece wheels offers a more aggressive and sporty look for luxury and exotic car applications while keeping factory like performance in mind. The Signature Series separates itself from our Solo Collection by introducing a more aggressive profile and maximum concavity for all applications. With additional weight reducing features the Signature Series is the ultimate selection in soon to be classic designs for your Luxury and Exotic Application.

6061-T6 Forged Aluminum
Hubcentric Fitment
CNC Machined to specific fitments designed for your application (BMW)
Powder Coat Finishes
OEM TPMS Compatible
Concave Profile

Stock photos of 1 Piece, not 2 piece. Same design without bolts

[bimmer4lif3]

Yes, I can read but concavity is subjective. I have read plenty of wheel manufactures descriptions that don't tell the full story. Plus the wheel in question is not the same as yours its a 1 piece.

The Velos Signature Series Wheel Collection of forged, concave profile, one-piece wheels offers a more aggressive and sporty look for luxury and exotic car applications while keeping factory like performance in mind.

[sspade]

I thought you said they were two piece wheels?

[IK6SPEED]

Originally Posted by sspade

I thought you said they were two piece wheels?

They are. Same design on the outside. The bolts can be seen in OP.

Velos S3 are custom made for the BMW F2x/F3x/F8x platform and available in 1, 2 or 3 piece wheels.

The exterior remains the same on each.

[sspade]

Originally Posted by IK6SPEED

They are. Same design.

Ah Okay, gotcha.

[ProperBimmer]

These are badass wheels, I would never admit to spending 8k on wheels and then selling for 3.5k....crazy.

[IK6SPEED]

Originally Posted by ProperBimmer

These are badass wheels, I would never admit to spending 8k on wheels and then selling for 3.5k....crazy.

I’ll gladly take more

Then again, look at price for 437m and 666m OEM and what people are selling for in Classifieds.

[nothingspecial]

These are gorgeous

[ProperBimmer]

Originally Posted by IK6SPEED

I'll gladly take more

Then again, look at price for 437m and 666m OEM and what people are selling for in Classifieds.

I know man, I just wouldn't take a hit like that. Even if you got them at cost that's tough to swallow!

I've invested thousands of dollars over the years in higher end wheels, but would never do anything close to 10k for wheels and tires. I had buyers regret twice with bbs lm's and rs-gt's (which both were damaged badly on NY/NJ roads). After that it was it.

[IK6SPEED]

Originally Posted by ProperBimmer

I know man, I just wouldn't take a hit like that. Even if you got them at cost that's tough to swallow!

I've invested thousands of dollars over the years in higher end wheels, but would never do anything close to 10k for wheels and tires. I had buyers regret twice with bbs lm's and rs-gt's (which both were damaged badly on NY/NJ roads). After that it was it.

Ok, so translation....

Someone’s getting a bargain

[ProperBimmer]

Originally Posted by IK6SPEED

Ok, so translation....

Someone’s getting a bargain

Absolutely!!! Lol

[Jmrdmd]

PM sent

[FastActionJax]

Damn! beautiful wheels, I hope you still have these come November I just built the motor on my motorcycle so the bank account needs to recharge, funny how things work. I cant find anything when I have the money and as soon as I spend it a deal like this pops up everytime. oh life.

[MO_23]

can you post full pics on a f30? or text them to me? currently looking for wheels!

[VAF30]

PM Sent..

[IK6SPEED]

For reference, the wheels are same at 437m at 19” with front at 9.0” and rear at 10.0”

ET in front is 35mm where 437m (and 666m) are 29mm, a difference of 6mm inward. If you feel this is an issue (it’s not), you can use a 5mm spacer to make up the difference.

There is only 2mm difference in rear to 437m and 666m at 42 ET VS 40 ET.

[IK6SPEED]

2020 Resolution. Clean out my garage. I want car back in there.

Willing to accept a reasonable offer.

[Nick_Beamer]

Beautiful set, waaayyyy out of my league like many others. GLWS!