[UhhItsANT]

anyone having problems extract the psdzdata? i keep getting error.... redownloaded everything too... using jdownloader. also reinstalled jdownloader to try. can i send someone a usb drive large enough to load it on already extracted for me?

[teaston]

Is it possible to code EBT to a CHAMP2 hu without adding any hardware?

Or is it only possible on NBT & CIC-high hu's?

[martinf79]

Any idea what section/parameters have the flashing brake option when coding (i.e. brake lights flash under hard braking like in the Europaen models)?

[shawnsheridan]

Originally Posted by martinf79

Any idea what section/parameters have the flashing brake option when coding (i.e. brake lights flash under hard braking like in the Europaen models)?

Fembody => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend

[shawnsheridan]

Originally Posted by teaston

Is it possible to code EBT to a CHAMP2 hu without adding any hardware?

Or is it only possible on NBT & CIC-high hu's?

It is possible if the car has Combox. If you have CHAMP2 and CMB_MEDIA in your SVT, then you should be able to code EBT.

[shawnsheridan]

Originally Posted by AntBabeee

anyone having problems extract the psdzdata? i keep getting error.... redownloaded everything too... using jdownloader. also reinstalled jdownloader to try. can i send someone a usb drive large enough to load it on already extracted for me?

When you are ready for a TeamViwer session, send me a PM and I will connect and take a look at it.

[martinf79]

Originally Posted by shawnsheridan

Fembody => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend

Perfect! Many thanks!

[martinf79]

Originally Posted by shawnsheridan

Fembody => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend

Sorry Shawn - just for clarity, does this turn on the hazzard lights (flashing), or simply flash the middle (3rd) brake light?

[Frogman]

Originally Posted by martinf79

Sorry Shawn - just for clarity, does this turn on the hazzard lights (flashing), or simply flash the middle (3rd) brake light?

It flashes the inner brakes lights in addition to the center one.

[martinf79]

Originally Posted by Frogman

It flashes the inner brakes lights in addition to the center one.

Cool... suppose like in this video at 56 sec and 1.05sec?:

[teaston]

Originally Posted by shawnsheridan

It is possible if the car has Combox. If you have CHAMP2 and CMB_MEDIA in your SVT, then you should be able to code EBT.

So doesn't the CHAMP2 have EBT built into the hu like NBT then?

[Frogman]

Originally Posted by martinf79

Cool... suppose like in this video at 56 sec and 1.05sec?:

Yes.

[shawnsheridan]

Originally Posted by teaston

So doesn't the CHAMP2 have EBT built into the hu like NBT then?

I don't think so. Code it for EBT and see if it works.

[vitchie]

I'm currently using E-Sys 3.22.5 with PSdZData 48.3 and a purchased patch/token.

1. Once my car goes in for a service would I need to update my software?
2. Is there any point in updating now already?
3. Would I need to purchase a new token yet as there is still a few months left until the 12 months are up.

Sorry about all the questions!

[mike4187]

shawnsheridan I'm looking for E-SYS and Data to read the I-Level of my F30. Do I need a token for this task?
Maybe later I want to do some coding too.

[shawnsheridan]

Originally Posted by vitchie

I'm currently using E-Sys 3.22.5 with PSdZData 48.3 and a purchased patch/token.

1. Once my car goes in for a service would I need to update my software?
2. Is there any point in updating now already?
3. Would I need to purchase a new token yet as there is still a few months left until the 12 months are up.

Sorry about all the questions!

1. Yes.
2. No. When the car is eventually updated, it may have a a newer release than what is available today, in which case you just wasted time and bandwidth.
3. It depends on which token solution you currently have. If you have "patched" token solution for 3.22.x from akiss, you will need a new token solution. But if you have "patchless" token solution for 3.22.x from TokenMaster, his 3.22.x solution will work with 3.23.4 also.

[shawnsheridan]

Originally Posted by mike4187

shawnsheridan I'm looking for E-SYS and Data to read the I-Level of my F30. Do I need a token for this task?
Maybe later I want to do some coding too.

PM sent.

[vitchie]

Originally Posted by shawnsheridan

1. Yes.
2. No. When the car is eventually updated, it may have a a newer release than what is available today, in which case you just wasted time and bandwidth.
3. It depends on which token solution you currently have. If you have "patched" token solution for 3.22.x from akiss, you will need a new token solution. But if you have "patchless" token solution for 3.22.x from TokenMaster, his 3.22.x solution will work with 3.23.4 also.

Thanks Shawn! I will wait then as I have the token from akiss.

[abcpop]

Originally Posted by shawnsheridan

Any idea what section/parameters have the flashing brake option when coding (i.e. brake lights flash under hard braking like in the Europaen models)?
Fembody => ESS_AKTIVIERBARER_AUSGANG = bremslicht_blinkend

I have this activ in my car but I never saw the the light blincking.

Does it works only in strong deceleration or so ?

[eyalgoldman]

Originally Posted by abcpop

I have this activ in my car but I never saw the the light blincking.

Does it works only in strong deceleration or so ?

You do need to break relatively hard.... check out this thread... http://www.f30post.com/forums/showthread.php?t=928784

I posted a video this week of my car doing it

[shawnsheridan]

Originally Posted by abcpop

I have this activ in my car but I never saw the the light blincking.

Does it works only in strong deceleration or so ?

Yes. It must be "hard braking". It is based on a certain rate of deceleration.

[abcpop]

Originally Posted by shawnsheridan

Yes. It must be "hard braking". It is based on a certain rate of deceleration.

Thank eyalgoldman and shawnsheridan.

I'll have a try...