[viliusv37]

Originally Posted by shawnsheridan

Can you VO Code FEM without error not using 522?

Assuming so, there is nothing wrong except for fact that 522 Coding is not compatable with your FEM Firmware.

I did not try this, will do.
From the researches I've done somebody mentioned, that this error is because of missing cafd_00000794-012_037_100 file and because later than v54.1 psdzdata files is trimmed and not good for coding. But to be honest my self I have no idea how true this is..

[shawnsheridan]

Originally Posted by viliusv37

I did not try this, will do.
From the researches I've done somebody mentioned, that this error is because of missing cafd_00000794-012_037_100 file and because later than v54.1 psdzdata files is trimmed and not good for coding. But to be honest my self I have no idea how true this is..

If CAFD was missing, you would have a [CO012] Missing CAFD error, not a Not Executable Error.

[zer0memory]

Originally Posted by shawnsheridan

Well, if you actually sent a PM, as instructed, rather than post again here, you would know...

PM sent.

A million thanks shawn

[viliusv37]

Originally Posted by shawnsheridan

If CAFD was missing, you would have a [CO012] Missing CAFD error, not a Not Executable Error.

Makes sense. So maybe I should get the latest psdzdata files? If so, maybe you have a link for the latest data files? Thanks for your help a lot!

[shawnsheridan]

Originally Posted by viliusv37

Makes sense. So maybe I should get the latest psdzdata files? If so, maybe you have a link for the latest data files? Thanks for your help a lot!

Unless you have a Missing CAFD error, and you don't, then new Coding files won't make any difference.

[viliusv37]

Originally Posted by shawnsheridan

Unless you have a Missing CAFD error, and you don't, then new Coding files won't make any difference.

Not good than... wondering if 522 VO is correct for xenon conversion?
Thats the tutorial I've followed:

First add 522 to your VO, and then write the VO to the Car as explained here:

http://www.bimmerfest.com/forums/att...6&d=1338725691

Then VO Code FEM_BODY:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

and this where I'm getting error

Then go back and FDL Code C_BLC_ENA = F030disable (it is under FEM_BODY, but I forgot what folder, I just used the search feature at the time and put in "C_BLC_ENA and it took me right to the folder)

Also can't get to this step because of error (didn't make a picture of it).
Also this tutorial is not very clear for my understanding, I might doing something wrong..

[shawnsheridan]

Originally Posted by viliusv37

...and this where I'm getting error
...

So Open FEM_BODY CAFD and use Search bar and put "C_BLC_ENA". and it should take you straight to it.

[viliusv37]

Originally Posted by shawnsheridan

So Open FEM_BODY CAFD and use Search bar and put "C_BLC_ENA". and it should take you straight to it.

Once I right-click on FEM_Body and click on ''Read Coding Data'' error comes up.. cafd file below FEM_Body from the list have sort of green arrow and the rest from the list grey dots, if this all makes sense..

[shawnsheridan]

Originally Posted by viliusv37

Once I right-click on FEM_Body and click on ''Read Coding Data'' error comes up.. cafd file below FEM_Body from the list have sort of green arrow and the rest from the list grey dots, if this all makes sense..

No, sorry. What is the exact error when you Read FEM?

Earlier you have error Writing to FEM (not executable), not Reading FEM.

[viliusv37]

Originally Posted by shawnsheridan

No, sorry. What is the exact error when you Read FEM?

Earlier you have error Writing to FEM (not executable), not Reading FEM.

Sorry to be a pain.
First step I do is to write 522 VO to FEM and I get an error (not executable).
Than I am trying to read FEM module by 'Read Coding Data' and comes back with an error instantly (did't make a picture of this error)

[shawnsheridan]

Originally Posted by viliusv37

Sorry to be a pain.
First step I do is to write 522 VO to FEM and I get an error (not executable).
Than I am trying to read FEM module by 'Read Coding Data' and comes back with an error instantly (did't make a picture of this error)

Once again, when you "read FEM module by 'Read Coding Data' and comes back with an error", what is the exact error?

[viliusv37]

Originally Posted by shawnsheridan

Once again, when you "read FEM module by 'Read Coding Data' and comes back with an error", what is the exact error?

Going to car in the minute and will make a picture. Thanks for your time.

[viliusv37]

Thats in the process of VO write to FEM, comes with some error description.


Thats an error when I am trying 'Read Coding Data'


Other module reading is fine

[shawnsheridan]

Originally Posted by viliusv37

...
Thats in the process of VO write to FEM, comes with some error description.

...Thats an error when I am trying 'Read Coding Data'
....
Other module reading is fine

"Object with with name not Found" means you car using Incorrect E-Sys Launcher Car Series or Incorrect E-Sys Connection Target.

[viliusv37]

Originally Posted by shawnsheridan

"Object with with name not Found" means you car using Incorrect E-Sys Launcher Car Series or Incorrect E-Sys Connection Target.

I feel stupid now... I have no idea how solve this..
I am using 'E-Sys_Setup-3.28.1-46869' and 'ESysLauncherPremiumSetup_2.6.2_Build_124'.
Connection via VIN.

[shawnsheridan]

Originally Posted by viliusv37

I feel stupid now... I have no idea how solve this..
I am using 'E-Sys_Setup-3.28.1-46869' and 'ESysLauncherPremiumSetup_2.6.2_Build_124'.
Connection via VIN.

What is E-Sys Launcher Car Series set to? F099? F030? F-Something else?

[viliusv37]

and I just click connect (car not connected in this picture) without changing nothing else. I thought it detect automatically.
My car is F30.

[shawnsheridan]

Originally Posted by viliusv37

...and I just click connect (car not connected in this picture) without changing nothing else. I thought it detect automatically.
My car is F30.

No, and that is your problem. In that Picture for an F30, you must select F020 without the _DIRECT at end of it.

But before that, in E-Sys Launcher you must set the Car Series to F030 as well.

[viliusv37]

Originally Posted by shawnsheridan

No, and that is your problem. In that Picture for an F30, you must select F020 without the _DIRECT at end of it.

But before that, in E-Sys Launcher you must set the Car Series to F030 as well.

Thank you. Fingers crossed this is my issue. Will test it once my boys fall a sleep, lol

[viliusv37]

Can't thank You enough fella!!! Finally headlights is alive!


I have couple more error, probably a metter of coding only not sure exactly what.

[viliusv37]

Its all done! Headlights are fully working without any errors. Thank you Shawn once again for your help!

[shawnsheridan]

Originally Posted by viliusv37

Its all done! Headlights are fully working without any errors. Thank you Shawn once again for your help!