10-14-2020, 07:59 PM | #1 |
Registered
0
Rep 2
Posts |
435i Exhaust to 430i?
Is there any one who has the 435i exhaust on their 430i? Haven't seen any posts about it. I would mainly want it for cosmetics, seeing that the dual tips on one side is starting to bug me. Comparing the pictures on AWE tuning they look the same but after all they are only pictures.
|
10-14-2020, 10:59 PM | #2 | |
Major
516
Rep 1,452
Posts |
Quote:
|
|
Appreciate
0
|
10-14-2020, 11:06 PM | #3 |
Brigadier General
1599
Rep 3,752
Posts |
Same hanger... Just make a hole on the other exit on the bumper. You just have to worry about the size of the exhaust pipe where you cut the axle back... You can weld them or a clamp with adaptor
There a few post here on the forum ... You just have to be creative with the button |
Appreciate
0
|
12-29-2020, 11:16 PM | #5 |
Second Lieutenant
54
Rep 243
Posts |
Pics are not the same! Espcailly, the tail lights LCI versus pre-LCI.
1st pic, mineral grey with non m sport rear bumper.. 2nd pic, black with m sport rear bumper. Anyways, you can install the 435i exhaust on an 430i, as long as you change out the diffuser to allow the cut out of right/left exhaust tips. |
Appreciate
0
|
12-29-2020, 11:27 PM | #6 |
Lieutenant Colonel
1052
Rep 1,788
Posts |
Check out the Valvetronic brand exhaust for the 430i, it's dual sided and pretty fairly priced. It uses the OEM valve as well. That is the one I'm going to get for my 430i.
From what I understand the 435i exhausts may require some tweaking to get it to line up but a 440i exhaust should bolt right up without tweaking. |
Appreciate
0
|
09-22-2021, 12:00 AM | #8 |
New Member
5
Rep 27
Posts |
I have/had a valvetronic exhaust/muffler and it broke after like 4 months of running it, cheaply price but also cheaply made on the inside, now it rattles like hell on start and I need to replace it. personally don't recommend it especially if you're gonna tune it
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|