06-09-2023, 08:20 AM | #1 |
New Member
0
Rep 5
Posts |
Windscreen drainage channel anomaly
On my UK Spec (i.e. RHD) F36 there's a drainage hole cut out below the driver's side windscreen wiper arm attachment (see photos 1 and 2) which allows water to drain away into a channel in the engine bay.
On the passenger side the drain hole is marked, but not cut out, so water and dirt builds up (see photos 3 and 4). I'm thinking about cutting a hole on the passenger side, but wondered if it not being cut out in the first place is a manufacturing mistake on my car, or whether they're all like this. Photo 1: Photo 2: Photo 3: Photo 4: |
06-09-2023, 08:26 AM | #2 |
Second Lieutenant
188
Rep 272
Posts
Drives: 2018 440i xDrive Gran Coupe
Join Date: May 2022
Location: Chicago, IL / Milwaukee, WI
|
Yup, mine is the same way, although flipped cause mine is a US-Spec LHD. Annoying during car washes with the soap foam stuck there
|
Appreciate
0
|
06-09-2023, 09:01 AM | #4 |
No 55mph
1621
Rep 8,476
Posts |
Common that there is no drainage hole on the PS
Simply drill a 1/4" hole @ the lowest point of the cavity as you show it (Not where that embossed circle is). You can see where to drill so that water drains thru to the funnel area of plastic below that area that directs water down & out bottom of car
__________________
F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|