10-18-2018, 03:18 PM | #1 |
Private
38
Rep 91
Posts
Drives: White 14' F32
Join Date: Oct 2018
Location: San Diego,CA
|
Mixing standard with run flats
So I read from one member that you shouldn't run 2 standard tires and 2 run flats I was wondering why? and if so I was trying to run 2 standard up front and 2 run flats in the back only because I can get the run flats in the size I want in the perfect fitment but if it's not good for driving then I'll just wait please guys let me know cause I have some one selling 275/35r19 for $150 2 tires
|
10-22-2018, 08:11 PM | #2 |
A family of bimmers
2745
Rep 7,741
Posts |
not good for mixing at all. run flats have a stiffer sidewall and construction. it would very much upset the handling of the car. sometimes saving a few bucks isn't worth it.
__________________
2018 PB/Black G01 X3M40i | 699M | ZDA | ZPP | ZPX | Maxton front lip | X3M vents | 15mm Spacers | Diamond G20 style grills |
Appreciate
0
|
10-22-2018, 11:41 PM | #3 |
Lieutenant General
5884
Rep 10,256
Posts |
I advise not to even consider it for safety reasons and reasons mentioned by wdeerfield . Standard tires in the front with softer sidewalls will most likely induce oversteer and almost every modern vehicle has slight understeer (less opportunities for the driver to place themselves in danger).
|
Appreciate
1
wdeerfield2745.00 |
Post Reply |
Bookmarks |
|
|