[ramparts]

Fixed

[steve@codemybimmer]

Do you still see the SWFL flash files and IBAD files underneath HU_NBT2? If all you see is HWEL and the BTLD, your head unit will need to be reflashed and there is no other way around it.

Your other option is to try using the transmitter on E-sys and setting the energy mode to normal to see if that can get it out of transport/flash mode.

Hope this helps

Originally Posted by davidoff86

happened while retrofitting 6WB

Blue screen on the display flashing time 00:00:00

Cant kick it out of flash mode ( tried TAL processing again).


any ideas ?


trying it access via transmitter via diag 63:
<<<< NO RESPONSE TO PHYS REQUEST >>>>


and in tal

[] - [Exception - HU_NBT2 - 63] negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_FTP has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[atzebmw]

Only an idea...
Try to code the ZBE or another unimportant ecu.
So only mark the ZBE and hit "code".
Then try again.
If you wonder...
Coding another ecu can help to leave the transport modus.
That has helped sometimes for one or the other.

[IAmATeaf]

How did you fix it? And why remove the original post, could help somebody else though I can see it has been quoted a post later?