01-05-2022, 03:01 PM | #1 |
Lieutenant
371
Rep 469
Posts |
Regulated power supply for ISTA+ and E-Sys Coding
Hi all, I recently built 2 regulated power supplies but only need one for coding with ISTA+ and E-Sys. Built based off (DIY: “Clean” Power Supply for PIWIS Coding - https://www.6speedonline.com/forums/...is-coding.html). Works like a charm and selling the spare. Set voltage at ~14.1 VDC and maintains ~60amps. Used heavy duty 4 gauge jumper cables and runs off 110 volt outlet power source. Looking to sell for $120.00 USD shipped in Continental United States Only. Last edited by Runner340; 01-05-2022 at 03:14 PM.. |
01-13-2022, 02:37 PM | #2 |
Captain
445
Rep 799
Posts |
Got any pictures of the solder joints? I read the linked thread, and I'm interested but a little nervous about the amount of current passing through those solder joints if not done well/with the proper equipment.
__________________
335i rwd auto, 2015 with m performance LSD and Dinan stage 2. Cts charge pipe, mad 5" stepped intercooler.
|
Appreciate
0
|
01-14-2022, 08:41 AM | #3 |
Lieutenant
371
Rep 469
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|