☛☛ MHD Flasher F+G Series B58 - OFFICIAL RELEASE ☚☚

marcthedark · 06-21-2020, 12:47 PM

almost OT
Did 200+ miles MA-CT-NY-NJ on Saturday and I got a very nice 33.6mpg for a 240ix Convertible MHD Stage 3 on 93 with the top up but AC on

alyabiev · 06-21-2020, 02:12 PM

Quote:

Originally Posted by marcthedark

almost OT
Did 200+ miles MA-CT-NY-NJ on Saturday and I got a very nice 33.6mpg for a 240ix Convertible MHD Stage 3 on 93 with the top up but AC on

Almost any tune is focused on WOT engine operation leaving light and medium loads barely touched. You should thank BMW for that MPG in the first place, not the tune.

J3Vr6 · 06-23-2020, 11:49 AM

Went to Stage 2 OTS with their new app. Using the wifi dongle, the OTS tune took around 2 minutes. I had issues with the license input on the app since they no longer have a store inside the app. I'm struggling to know if the tune even stuck. I don't see it anywhere in the app, but is there a way to see which tune you have installed?

IMS-340MP · 06-23-2020, 12:01 PM

Go to Codes > Read DME Codes

It will show which tune is installed in your car.

Quote:

Originally Posted by J3Vr6

Went to Stage 2 OTS with their new app. Using the wifi dongle, the OTS tune took around 2 minutes. I had issues with the license input on the app since they no longer have a store inside the app. I'm struggling to know if the tune even stuck. I don't see it anywhere in the app, but is there a way to see which tune you have installed?

samchuang33 · 08-20-2020, 08:35 AM

So how acurate are the updated HP and torque graph after the remap?

I'm on stage 1 93aki and notice that the needle can go up to ~300kw and ~600nm under WOT.

Supr3me · 08-20-2020, 11:10 PM

Quote:

Originally Posted by samchuang33

So how acurate are the updated HP and torque graph after the remap?

I'm on stage 1 93aki and notice that the needle can go up to ~300kw and ~600nm under WOT.

Lololololol

cxmplex · 11-22-2020, 12:30 AM

Quote:

Originally Posted by MHD Tuning

We recommend on stock cat:

Base 0
Sport 1s
Soft
1200 RPM
0mph

What would you recommend on a high-flow cat? I assume hard is too much for the cats, but medium might be somewhat acceptable?

MHD Tuning · 11-24-2020, 05:45 AM

MHD BLACK FRIDAY SALE 2020
15% off on all MHD tunes / licenses from our Webshop.

Visit: https://mhdtuning.com/collections

PeterWT · 11-24-2020, 09:07 AM

Quote:

Originally Posted by MHD Tuning

MHD BLACK FRIDAY SALE 2020
15% off on all MHD tunes / licenses from our Webshop.

Visit: https://mhdtuning.com/collections

Thanks for the heads up, I've been waiting... going to purchase a license.

I'm planning to do MHD & xHP to take advantage of the synergies in settings and wifi adapter.

Anyone know if xHP does Black Friday sales? I can't find anything online.

FirstBMWLA · 11-24-2020, 01:39 PM

Quote:

Originally Posted by MHD Tuning

MHD BLACK FRIDAY SALE 2020
15% off on all MHD tunes / licenses from our Webshop.

Visit: https://mhdtuning.com/collections

Quote:

Originally Posted by MHD Tuning

MHD BLACK FRIDAY SALE 2020
15% off on all MHD tunes / licenses from our Webshop.

Visit: https://mhdtuning.com/collections

man I just bought like 1.5wk ago....

T_H_O_M_A_S · 11-25-2020, 12:45 PM

Today i had a dyno session at pureturbo's belgium to log all the OTS maps (stg0 till stg2hpfp ) in mhd . all runs were done on E30 , numbers are in whp . Stock turbo

mike082802 · 11-25-2020, 09:18 PM

Quote:

Originally Posted by T_H_O_M_A_S

Today i had a dyno session at pureturbo's belgium to log all the OTS maps (stg0 till stg2hpfp ) in mhd . all runs were done on E30 , numbers are in whp . Stock turbo

which hpfp?

T_H_O_M_A_S · 11-26-2020, 02:29 AM

bosch hdp6 or more commonly known as the supra pump

IMS-340MP · 11-26-2020, 03:13 AM

Just to confirm all runs were done using E30 maps running on E30 fuel ? not 93 maps running on E30 fuel ?

Thanks for sharing very impressive numbers.

Quote:

Originally Posted by T_H_O_M_A_S

Today i had a dyno session at pureturbo's belgium to log all the OTS maps (stg0 till stg2hpfp ) in mhd . all runs were done on E30 , numbers are in whp . Stock turbo

T_H_O_M_A_S · 11-26-2020, 03:37 AM

I ran E30 option on every map with e30+ fuel except for the stock map where you dont have anything to choose from

PeterWT · 11-26-2020, 02:22 PM

I have the OE cat and intake. Before I flashed MHD, I did a code read. There were no codes and all the readiness monitors were 'complete'.

ECU status: -

- Readiness -
Misfire: Complete.
Fuel System: Complete.
Components: Complete.
Catalyst: Complete.
Heated Catalyst: Not avail.
Evaporative System: Complete.
Secondary Air System: Not avail.
A/C Refrigerant: Not avail.
Oxygen Sensor: Complete.
Oxygen Sensor Heater: Complete.
EGR System: Complete.

Then, I flashed MHD stage 1 93 Oct map, waited 30 seconds, started the engine, let it complete the cold start procedure, turned off the engine and then read the codes. Now, many of the readiness monitors are 'incomplete'.

ECU status: -

- Readiness -
Misfire: Complete.
Fuel System: INCOMPLETE.
Components: Complete.
Catalyst: INCOMPLETE.
Heated Catalyst: Not avail.
Evaporative System: INCOMPLETE.
Secondary Air System: Not avail.
A/C Refrigerant: Not avail.
Oxygen Sensor: INCOMPLETE.
Oxygen Sensor Heater: INCOMPLETE.
EGR System: INCOMPLETE.

Is this expected/normal?

Jnat · 11-26-2020, 07:40 PM

Completely normal...

blvvet · 11-27-2020, 03:57 AM

Quote:

Originally Posted by MHD Tuning

MHD BLACK FRIDAY SALE 2020
15% off on all MHD tunes / licenses from our Webshop.

Visit: https://mhdtuning.com/collections

All I need is to disable the opf.
Could I only purchase the "MHD Flasher License" without any maps?

MHD Tuning · 11-27-2020, 08:14 AM

Quote:

Originally Posted by blvvet

All I need is to disable the opf.
Could I only purchase the "MHD Flasher License" without any maps?

Yes you can do that, install stage 0 stock power and disable the OPF

blvvet · 11-27-2020, 09:14 AM

Quote:

Originally Posted by MHD Tuning

Yes you can do that, install stage 0 stock power and disable the OPF

I wonder whether the STOCK POWER is some kind of factory map of EU vehicle?
My concern is about the difference of gasoline quality in different religions may cause engine knock..

MHD Tuning · 12-01-2020, 08:32 AM

Quote:

Originally Posted by blvvet

I wonder whether the STOCK POWER is some kind of factory map of EU vehicle?
My concern is about the difference of gasoline quality in different religions may cause engine knock..

No sir you cant run a EU map on a USA car. It's always the right map for your car based on the factory reading.

kianf22 · 12-03-2020, 05:46 PM

Quote:

Originally Posted by cxmplex

Quote:

Originally Posted by MHD Tuning

We recommend on stock cat:

Base 0
Sport 1s
Soft
1200 RPM
0mph

What would you recommend on a high-flow cat? I assume hard is too much for the cats, but medium might be somewhat acceptable?

i have the same cat and would like to know as well

06-21-2020, 12:47 PM	#155
marcthedark First Lieutenant 95 Rep 322 Posts Drives: M240i xdrive Convertible Join Date: Apr 2017 Location: NJ iTrader: (0)	almost OT Did 200+ miles MA-CT-NY-NJ on Saturday and I got a very nice 33.6mpg for a 240ix Convertible MHD Stage 3 on 93 with the top up but AC on
	Appreciate 0 Quote

06-23-2020, 11:49 AM	#157
J3Vr6 Private 3 Rep 55 Posts Drives: 2016 BMW 340i (RWD) Join Date: Feb 2019 Location: Florida iTrader: (0)	Went to Stage 2 OTS with their new app. Using the wifi dongle, the OTS tune took around 2 minutes. I had issues with the license input on the app since they no longer have a store inside the app. I'm struggling to know if the tune even stuck. I don't see it anywhere in the app, but is there a way to see which tune you have installed?
	Appreciate 0 Quote

08-20-2020, 08:35 AM	#159
samchuang33 Captain 34 Rep 777 Posts Drives: MY 16 440i & MY20 X7 30d Join Date: Feb 2009 Location: Brisbane AUS iTrader: (0)	So how acurate are the updated HP and torque graph after the remap? I'm on stage 1 93aki and notice that the needle can go up to ~300kw and ~600nm under WOT. __________________ 2016 BMW F36 440i GC M Sport 2018 Audi FY Audi SQ5 2020 BMW G07 X7 3.0d M Sport
	Appreciate 0 Quote

11-24-2020, 05:45 AM	#162
MHD Tuning BimmerPost Supporting Vendor 1762 Rep 1,248 Posts Drives: M3F80#M5F90#340iF31#SupraA90 Join Date: Feb 2015 Location: Germany iTrader: (0)	MHD BLACK FRIDAY SALE 2020 15% off on all MHD tunes / licenses from our Webshop. Visit: https://mhdtuning.com/collections
	Appreciate 0 Quote

11-25-2020, 12:45 PM	#165
T_H_O_M_A_S Private First Class 146 Rep 184 Posts Drives: M135xi Join Date: Mar 2019 Location: Belgium iTrader: (0)	Today i had a dyno session at pureturbo's belgium to log all the OTS maps (stg0 till stg2hpfp ) in mhd . all runs were done on E30 , numbers are in whp . Stock turbo Attached Images __________________ M140i DP , OPF delete , MHD stg2 93oct , xhp stg3
	Appreciate 3 IMS-340MP146.50 kern4173252.50 geramata0.00 Quote

11-26-2020, 02:29 AM	#167
T_H_O_M_A_S Private First Class 146 Rep 184 Posts Drives: M135xi Join Date: Mar 2019 Location: Belgium iTrader: (0)	bosch hdp6 or more commonly known as the supra pump __________________ M140i DP , OPF delete , MHD stg2 93oct , xhp stg3
	Appreciate 0 Quote

11-26-2020, 03:37 AM	#169
T_H_O_M_A_S Private First Class 146 Rep 184 Posts Drives: M135xi Join Date: Mar 2019 Location: Belgium iTrader: (0)	I ran E30 option on every map with e30+ fuel except for the stock map where you dont have anything to choose from __________________ M140i DP , OPF delete , MHD stg2 93oct , xhp stg3
	Appreciate 1 IMS-340MP146.50 Quote

11-26-2020, 02:22 PM	#170
PeterWT Lieutenant 147 Rep 400 Posts Drives: '17 M240i, AT, BSM Join Date: Dec 2016 Location: Florida, USA iTrader: (0)	I have the OE cat and intake. Before I flashed MHD, I did a code read. There were no codes and all the readiness monitors were 'complete'. ECU status: - - Readiness - Misfire: Complete. Fuel System: Complete. Components: Complete. Catalyst: Complete. Heated Catalyst: Not avail. Evaporative System: Complete. Secondary Air System: Not avail. A/C Refrigerant: Not avail. Oxygen Sensor: Complete. Oxygen Sensor Heater: Complete. EGR System: Complete. Then, I flashed MHD stage 1 93 Oct map, waited 30 seconds, started the engine, let it complete the cold start procedure, turned off the engine and then read the codes. Now, many of the readiness monitors are 'incomplete'. ECU status: - - Readiness - Misfire: Complete. Fuel System: INCOMPLETE. Components: Complete. Catalyst: INCOMPLETE. Heated Catalyst: Not avail. Evaporative System: INCOMPLETE. Secondary Air System: Not avail. A/C Refrigerant: Not avail. Oxygen Sensor: INCOMPLETE. Oxygen Sensor Heater: INCOMPLETE. EGR System: INCOMPLETE. Is this expected/normal? __________________ My 2017 M240i: MHD, xHP, Modded OE Intake, CTS Turbo 200 CPSI Cat DP, Dinan Mid-pipe, M Performance LSD & Rear Diffuser, BMS Exhaust Tips, Apex EC-7 Wheels, M-Tech Front Lip, iND Painted Mirror Caps, Smoked Reflectors Last edited by PeterWT; 11-26-2020 at 02:27 PM..
	Appreciate 0 Quote

11-26-2020, 07:40 PM	#171
Jnat DisplacementReplacement 63 Rep 558 Posts Drives: 2017 M240XI Join Date: Sep 2012 Location: Jersey Shore iTrader: (0)	Completely normal... __________________ 2017 M240XI - MHD STG 2 E30 or 95Oct - XHP STG3 - CTS Catted Dpipe - AFE Drop in Dry ***
	Appreciate 1 PeterWT147.00 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search