[Solid67]

Originally Posted by OzBMR

It really depends on the HPFP rail pressure and the load/torque/boost profile of the map.

If the BM3 E30 maps are like the 93 maps with high load/boost overshoot around 3000 RPM then you may already be at the limit of the HPFP and adding more boost will just result in a HPFP crash.

Do you have any current BM3 Stage 2 E30 OTS logs you can share? PM me if you'd prefer.

stg 2 93:

https://www.bootmod3.net/log?id=5dfe...729b4642a50c7f

stg 2 e30:

https://www.bootmod3.net/log?id=5d6d...90c652e3aa327e

[OzBMR]

Originally Posted by Solid67

stg 2 93:

https://www.bootmod3.net/log?id=5dfe...729b4642a50c7f

stg 2 e30:

https://www.bootmod3.net/log?id=5d6d...90c652e3aa327e

You definitely wouldn't be able to use a MAP signal spoofer with either of those maps as they are already close to the point of HPFP rail pressure lower limit.

With the Stage 2 93 map the car hits 1116 PSI vs target of 2878 PSI at 4242 RPM This is because of the relatively high boost of 18 - 20 PSI between 2900 - 4500 RPM By comparison MHD equivalent map has about 16 - 17 PSI in the same area.

The Stage 2 E30 map gets to 1522 PSI vs target of 3100 PSI at 4357 RPM with boost 0f 18 - 20 PSI between 3200 - 3800 RPM.

Adding boost on top of that would result in hard crashing rail pressure.

I'm surprised BM3 haven't lowered the load/torque targets in their maps to better cater for the HPFP limits. They should target 170 - 175 Load Target at WOT from about 2000 RPM to about 4500 RPM then ramp it up.

[Stampe]

Originally Posted by Stampe

Hi
It's been time for some stock times so many don't feel theirs is slow,

340i rwd , 8 speed - bone stock - 1 person - 70% tank
dragy.

0-100 = 5,09
100-200 = 13.02
100-200 = 12.55 return
1/4 mile = 12.97

New time with mppk same day/road as 13.02 new time 11.12

[boosted]

How to view those staging lights to know when to get on it? When I switch to video I don’t see it.

How to use it overall? I connected to satellite.
Just got Dragy but will run tomorrow.

[Glemm1970]

My results with this auto configuration:
MHD stage 2 98 RON. CSF Intercooler Radiator, Full Catalytic Exhaust, Cold Inlet. 0-100 3.66c. 100-200 8.2c. 0-402m 11.6c. When using methanol with control through JB4, the results so far are: 0-100 3.6 s. 100-200 7.7s. 0-402m 11.34s

[yokata]

Originally Posted by Glemm1970

My results with this auto configuration:
MHD stage 2 98 RON. CSF Intercooler Radiator, Full Catalytic Exhaust, Cold Inlet. 0-100 3.66c. 100-200 8.2c. 0-402m 11.6c. When using methanol with control through JB4, the results so far are: 0-100 3.6 s. 100-200 7.7s. 0-402m 11.34s

Is this xdrive?

[Glemm1970]

M140IX x-drive.

[VipinLJ]

Originally Posted by boosted

How to view those staging lights to know when to get on it? When I switch to video I don’t see it.

How to use it overall? I connected to satellite.
Just got Dragy but will run tomorrow.

I’ve never used or own a dragy. But from the videos I’ve seen, I believe the staging lights come on automatically before it detects the car moving. It doesn’t pop up and you don’t have to respond to it. It’s an overlay on the video after it has been recorded.

[Solid67]

Originally Posted by boosted

How to view those staging lights to know when to get on it? When I switch to video I don’t see it.

How to use it overall? I connected to satellite.
Just got Dragy but will run tomorrow.

I have the same issue as you and I use an android phone. Not sure if it is just android users that have this issue.

[IMS-340MP]

Open the Dragy app> me>videos
Choose the video you want then tap next on the top right corner then tap export also on the top right corner.

The Dragy app will set the staging lights automatically.

Originally Posted by boosted

How to view those staging lights to know when to get on it? When I switch to video I don’t see it.

How to use it overall? I connected to satellite.
Just got Dragy but will run tomorrow.

Originally Posted by Solid67

I have the same issue as you and I use an android phone. Not sure if it is just android users that have this issue.

[B58togo]

Originally Posted by Glemm1970

My results with this auto configuration:
MHD stage 2 98 RON. CSF Intercooler Radiator, Full Catalytic Exhaust, Cold Inlet. 0-100 3.66c. 100-200 8.2c. 0-402m 11.6c. When using methanol with control through JB4, the results so far are: 0-100 3.6 s. 100-200 7.7s. 0-402m 11.34s

11.30's in the quarter. Nice! Won't be long before we see a stock turbo OG B58 in the 10's.

[OzBMR]

Originally Posted by B58togo

11.30's in the quarter. Nice! Won't be long before we see a stock turbo OG B58 in the 10's.

A guy with an M140i, stock turbo custom tune by F80Paul and meth injection did 10.84@127.87mph on 23rd Feb 2020 https://www.picuki.com/media/2250388541683278488

I plan to get into the 10's on stock turbo without meth

[B58togo]

Originally Posted by OzBMR

A guy with an M140i, stock turbo custom tune by F80Paul and meth injection did 10.84@127.87mph on 23rd Feb 2020 https://www.picuki.com/media/2250388541683278488

I plan to get into the 10's on stock turbo without meth

Dayuum! Can't wait to install my Dorch pump Friday. This cold weather sucks though. Need it to warm up a bit before I start tuning with Paul.

[boosted]

Very happy, overall, changing signature . With some practice, I can drop a bit more.
Only flash and catted downpipe in signature. 0-60 3.56s

[OzBMR]

Originally Posted by boosted

Very happy, overall, changing signature . With some practice, I can drop a bit more.
Only flash and catted downpipe in signature. 0-60 3.56s

Nice times.

Do you have xHP tune for transmission? I'd expect a 60ft time of 1.7 seconds or better with X drive in a tuned car.

Also, are you starting in 1st or 2nd gear?

[enemigo13]

340i xdrive.

[boosted]

Originally Posted by OzBMR

Nice times.

Do you have xHP tune for transmission? I'd expect a 60ft time of 1.7 seconds or better with X drive in a tuned car.

Also, are you starting in 1st or 2nd gear?

Thanks!

I have MP stg 1 trans flash, so I’m all set.
I did break torque around 2300rpm (last night) in D and Sport +.. not manually shifting to 1st or 2nd gear. I need to practice to achieve 1.7s or lower.

Any suggestion - I’m all ears as this is my first AWD

[OzBMR]

Originally Posted by boosted

Thanks!

I have MP stg 1 trans flash, so I’m all set.
I did break torque around 2300rpm (last night) in D and Sport +.. not manually shifting to 1st or 2nd gear. I need to practice to achieve 1.7s or lower.

Any suggestion - I’m all ears as this is my first AWD

With xHP you can adjust launch control for even faster AWD launches.

A lot of people have recorded quicker times by being in Sport+, shifter to the left, manual shifting, and launching from 2nd gear. This eliminates 1 x gear change to 60 mph and is quicker for quarter mile.

Rev 2nd gear out to about 6800 RPM, change 3rd and 4th at 6500 RPM.

Rev 5th out to 6700 RPM and record 100 - 200 km/h and 60 - 130 MPH times too

[boosted]

Originally Posted by OzBMR

With xHP you can adjust launch control for even faster AWD launches.

A lot of people have recorded quicker times by being in Sport+, shifter to the left, manual shifting, and launching from 2nd gear. This eliminates 1 x gear change to 60 mph and is quicker for quarter mile.

Rev 2nd gear out to about 6800 RPM, change 3rd and 4th at 6500 RPM.

Rev 5th out to 6700 RPM and record 100 - 200 km/h and 60 - 130 MPH times too

Sounds good
I’ll try it this weekend, thanks.

[GM320]

320xi swapped in 340xi
Tune: Stage 2 KK-Performance
Downpipe: Mikes Custom

First and only attempts[IMG][/IMG]

[yokata]

Originally Posted by GM320

320xi swapped in 340xi
Tune: Stage 2 KK-Performance
Downpipe: Mikes Custom

First and only attempts[IMG][/IMG]

What size wheels and tyres r u currently running?

[GM320]

Originally Posted by yokata

What size wheels and tyres r u currently running?

Michelin PS4, stock 18 inch 400m wheels. 225 mm front and 255 mm rear