06-19-2021, 10:59 AM | #23 | |
Colonel
588
Rep 2,302
Posts |
Quote:
https://mega.nz/folder/pSQwmLob#-0ltXS6RykDELDHZS9IqIg You can install different E-Sys versions if you name each folder differently during installation. And you can install different psdzdata if you name the folder for example to old_psdzdata. E-Sys will always use the psdzdata from the folder ...Data/psdzdata. Last edited by atzebmw; 06-19-2021 at 11:52 AM.. |
|
Appreciate
0
|
06-21-2021, 09:06 AM | #24 | |
New Member
5
Rep 27
Posts |
Quote:
Although, I tried to do it, and Im still getting the same errors. Although I did also try another older CAFD from that tree. And it made a 'ding" on the car, when I tried to connect back to the car, it doesn't show the 255_255_255, it does show different numbers, but they seem to be black as opposed to the blue that the other ecu's have, is this a positive step? Although - I did still get a sort of error when that happened too? <Caf's suchen> TAL calculation started. Locally NCD signature calculation started Processing ncd signing finished TAL execution started. <> Read SVT before TAL execution started. Read SVT before TAL execution finished. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. <ExecutionID=2021/06/21-15:54:54.530> <[] prepareTALExecution started [PROGRESS]> <[] prepareTALExecution finished [PROGRESS]> <[] prepareVehicleForCoding started [PROGRESS]> <[] prepareVehicleForCoding finished [PROGRESS]> <[FEM_BODY - 40] prepareECUforCoding started [PROGRESS]> <[FEM_BODY - 40] prepareECUforCoding finished [PROGRESS]> <[FEM_BODY - 40] authenticateECUforCoding started [PROGRESS]> <[FEM_BODY - 40] authenticateECUforCoding finished [PROGRESS]> <[FEM_BODY - 40 - cafd_00000794-007_031_010] Transaction type: cdDeploy; Message: TA started [TRANSACTION]> <MCDDiagService<id=62900, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: timeout, link=FEM_BODY_40_ETHERNET> [DIAGSERVICE]> <MCDDiagService<id=62900, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: timeout, link=FEM_BODY_40_ETHERNET> [DIAGSERVICE]> <[FEM_BODY - 40 - cafd_00000794-007_031_010] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]> <[FEM_BODY - 40] finalizeECUCoding started [PROGRESS]> <[FEM_BODY - 40] finalizeECUCoding finished [PROGRESS]> <[] finalizeVehicleCoding started [PROGRESS]> <[] finalizeVehicleCoding finished [PROGRESS]> <[] finalizeTALExecution started [PROGRESS]> <[] finalizeTALExecution finished [PROGRESS]> <TAL execution finished [TAL_EXECUTION_FINISHED]> TAL-Execution finished with status: "FinishedWithWarnings". TAL execution finished. Duration: "27s". <> Read SVT after TAL execution started. Read SVT after TAL execution finished. TAL execution finished. |
|
Appreciate
0
|
06-21-2021, 04:07 PM | #25 | |
Colonel
588
Rep 2,302
Posts |
Quote:
Do you have currently any problems with the car or error messages in the IDrive? Can you now FDL Code again some things in the FEM_Body? |
|
Appreciate
0
|
06-22-2021, 03:11 PM | #26 | |
New Member
5
Rep 27
Posts |
Quote:
then I came back in, coded something else and its currently corrupted again, so Im going to assume its the cable being inconsistent. |
|
Appreciate
0
|
06-23-2021, 06:48 AM | #27 | |
New Member
5
Rep 27
Posts |
Quote:
Thank you again for your help! |
|
Appreciate
1
atzebmw588.00 |
06-23-2021, 07:37 AM | #28 |
Colonel
588
Rep 2,302
Posts |
I am glad to hear that.
|
Appreciate
1
F30BMWWHITE4.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|