02-01-2023, 01:27 PM | #1 |
Registered
0
Rep 2
Posts |
Increasing Negative Camber
I'm on a set of BC Racing coils, and I want to reach around -5 to -7 camber for my car. What part(s) should I buy in order to reach that -5 to -7 range? I was looking into rear Camber arms, but don't know if that is the best thing to buy, and I couldn't find much for the front.
Thanks in advance! |
02-04-2023, 10:53 PM | #5 |
Captain
343
Rep 874
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
I am going to go out on a limb and assume you mean .5 to .7. If this is the case, then the car is usually around that already stock.
Assuming you aren't and want -5.0 to -7.0 degrees, then we're going to have a bigger issue... You're going to need a lot more done to accomplish this and in the end, is going to result in a lot of excessive wear on components, especially tires. I know people go for the stance look, and depending on if you're looking at static or bagged, will depend on your choice of parts. You're going to need everything adjustable. Control arms, end links, camber plates, toe arms, the whole 9 to achieve even 3-4 degrees. To go past that and we're talking a lot of custom parts. Go check out turner motorsports in their suspension list and look at the upgrades they offer for an idea on how much the cost is and range of adjustability
__________________
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|