10-25-2021, 08:10 PM | #1 |
Private
3
Rep 86
Posts |
Max rear camber
Lowered on H&R Super Sport springs. BMW tech stated he could not get more than -1.6 degrees of camber in the rear. I was targeting -2 degrees so I wouldn’t rub.
I find it hard to believe that -1.6 is “max” on stock bolts/arms. |
10-29-2021, 11:32 AM | #3 |
Private
31
Rep 75
Posts |
My rear camber is -2.1 after Bilstein B14 kit install. Was -1.7 prior. Just setting the height to the lowest setting made the change. Ride height lowered about 1/2" (12.5mm).
__________________
2014 335i - BM3 Stage 2+ Race Gas, VRSF Catless DP, Race IC, CP, Muffler Delete, xHP Stage 3, NGK 97506, Eldor Coils, Turner Motorsport intake with BMS filter, BMS Oil Catch Can, Red Line fluids.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|