08-25-2020, 06:56 PM | #1 |
¯\_(ツ)_/¯
945
Rep 1,762
Posts |
PA/NJ - Injen N20 N26 intake - black - SP1122WB
LOCAL PICKUP ONLY - I HAVE THE INTAKE IN PHILADELPHIA. I AM WILLING TO DRIVE TO SOUTH/CENTRAL JERSEY - WILMINGTON BUT YOU COVER TOLLS Selling my Injen intake that I had on my 328i with an N20 engine. Fits all N20/N26 engines (228, 328, 428) DRY filter, regularly cleaned, has some creases in it but it does not affect performance. No tears in the filter element. All hardware included except one torx bolt for the top cover, but the cover has three other bolts holding it and doesn't affect performance at all. The only negative about the intake is that it does have some rusting on the top cover, some minor spots on the lower box and two scuff marks on the lower tube from the hood cable. You can sand the rust and paint it if you'd like. I would do it but I do not have time since I am moving. Asking $260. This goes for $350+ new.
__________________
Tensioner/belt DIY | Side skirt extension DIY
Apex SM-10/DWS06+ | 400m/X-ice Xi3 | Injen Exhaust | Stoptech SS Lines | 335 Front Brakes Hawk HPS 5.0 | RBF600 | ER Charge Pipes | Wagner Evo Comp 2 FMIC Last edited by Solidjake; 09-03-2020 at 08:19 AM.. |
08-31-2020, 08:38 PM | #2 |
¯\_(ツ)_/¯
945
Rep 1,762
Posts |
Bump, price is negotiable.
__________________
Tensioner/belt DIY | Side skirt extension DIY
Apex SM-10/DWS06+ | 400m/X-ice Xi3 | Injen Exhaust | Stoptech SS Lines | 335 Front Brakes Hawk HPS 5.0 | RBF600 | ER Charge Pipes | Wagner Evo Comp 2 FMIC |
Appreciate
0
|
09-07-2020, 04:04 AM | #4 |
¯\_(ツ)_/¯
945
Rep 1,762
Posts |
Good for you. I'm not shipping. The item is way too heavy to ship plus shipping costs would be too much.
__________________
Tensioner/belt DIY | Side skirt extension DIY
Apex SM-10/DWS06+ | 400m/X-ice Xi3 | Injen Exhaust | Stoptech SS Lines | 335 Front Brakes Hawk HPS 5.0 | RBF600 | ER Charge Pipes | Wagner Evo Comp 2 FMIC |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|