05-11-2021, 08:02 AM | #1 |
Space Shuttle Door Gunner
6430
Rep 5,309
Posts |
430i upgrading to 35i/40i "grey" brakes
I'm certain someone has done this upgrade, but I'm having a tough time tracking down info via the search.
I assume there is no need to swap out the master cylinder when doing this upgrade, right? Do the grey Brembos and larger rears require different brake lines compared to the OEM lines on the 30i? |
05-11-2021, 08:54 AM | #2 | |
Enlisted Member
30
Rep 39
Posts |
Quote:
Rear dust shields should accommodate the 330mm rotors. May need to bend them a little if otherwise. Gotta check your VIN. BMW has multiple variations of rear dust shields. Rear calipers will bolt right on. No need to upgrade the master cylinder. Source: upgraded to m sport front/rear myself
__________________
2012 Glacier Silver F30 328i
18 x 8.5 Square Apex SM-10 | 245/40/18 Michelin PS4 | F8x LCA | Red M Performance Brakes | F80 Steering Wheel | VRSF 5" HD FMIC | Full FTP Piping |
|
Appreciate
1
hooligan_G016430.00 |
05-11-2021, 09:43 AM | #3 | |
Space Shuttle Door Gunner
6430
Rep 5,309
Posts |
Quote:
Awesome, that's what I was hoping to hear. Appreciated! |
|
Appreciate
1
E60F3030.00 |
Post Reply |
Bookmarks |
|
|