[Artisdeff]

has anyone else experience the JB4 app glitching out during hard pulls. my app tends to flash and start data logging briefly then back to normal. only happens during hard pulls

[eluded]

Jb4 is so 2017

[Wires]

Never did logging with the JB4, but there would be a lot of data transmitting at high RPM/loads, and a very high rate. If you have a lot of channels being monitored, it's possible the JB4 just cannot keep up to the amount of data you are requesting.

My guess is if you reduce the number of channels you are watching, then it probably won't happen.

[deviantspeed]

Originally Posted by eluded

Jb4 is so 2017

Except there's an active forum, and I'm sure OP can call them, too.

I'll bet your (eluded) tire codes are from older than 2017.

Little cleaning of contacts and some corrosionX seems to help in a lot of areas, or you are running the wrong map OP.

[Artisdeff]

thanks ill give that a try i know its not the map though im only running map1. car runs perfect. Its only the app that gets weird.

Originally Posted by deviantspeed

Except there's an active forum, and I'm sure OP can call them, too.

I'll bet your (eluded) tire codes are from older than 2017.

Little cleaning of contacts and some corrosionX seems to help in a lot of areas, or you are running the wrong map OP.