12-13-2018, 11:59 AM | #1 |
New Member
1
Rep 17
Posts |
FOB - trunk button problem
Hey there,
I got a small problem with the 3rd button on my F31 FOB, the one that opens the trunk. Atm, in order to open the trunk, I got to hold the 3rd button for at least 3 seconds and then, upon release, the trunk opens. Any release quicker than 3 second gets no action. If I just push it once, also, nothing happens. I think I coded that with E-Sys (among many other things, that's why I am not 100% sure) via the "ticking system list" and dunno how to undo it. Or it could be a side effect from coding the inside car trunk open button, I dunno. I would like to open my trunk normally, with a push of the 3rd button. I already tried tampering with this: HU_NBT/3000 HMI/KEY_CONF_TAILGATE HU_NBT/3000 HMI/KEY_CONF_COMFORT HU_NBT/3000 HMI/KEY_CONF_COMFORT_TAILGATE but with no result. Any ideea what to code or revert back to get my normal FOB function back ? Any ideea or tip would be appreciated, Thanks ! Kind regards, Chris. |
12-13-2018, 12:21 PM | #2 |
Captain
238
Rep 878
Posts |
Isn’t that normal? Mine does the same, I thought it was to prevent accidental opening if the fob is in your pocket from an accidental press.
|
Appreciate
0
|
12-14-2018, 12:00 AM | #3 |
Second Lieutenant
66
Rep 204
Posts
Drives: 2016 428i GC Alpine White
Join Date: Oct 2018
Location: Dallas, TX
|
I think the behaviour is correct as is. The question perhaps is if the OP's request is even possible or envisioned by BMW?
__________________
2016 428i GC
|
Appreciate
0
|
12-14-2018, 07:34 AM | #4 | |
Lieutenant General
8170
Rep 15,962
Posts |
Quote:
In order to change reaction time there would have to be a CAFD entry with werte values. There are none that I can find, only on/off (actif/nicht_actif). |
|
Appreciate
0
|
12-17-2018, 03:38 AM | #5 | |
New Member
1
Rep 17
Posts |
Quote:
|
|
Appreciate
0
|
12-17-2018, 03:56 AM | #6 |
Enlisted Member
3
Rep 42
Posts |
I wish mine do the same thing AS you.My trunk button in my key fob is way to sensitive, tried different codings to try And increase the time Delay to open my trunk but ended up Nothing
|
Appreciate
0
|
12-17-2018, 04:20 AM | #7 |
Captain
238
Rep 878
Posts |
Has your car been to the dealer recently? I'm sure I read somewhere here that peoples trunk/boot were randomly opening and as a result there was some sort of bulletin to the dealers to change the behaviour of the trunk/boot release button on the fob?
|
Appreciate
0
|
12-18-2018, 03:55 AM | #8 | |
New Member
1
Rep 17
Posts |
Quote:
It just changed after I coded the FOB to close the trunk and/or the inside car trunk button to close the trunk. The problem is that I did those codings via ticking them in the cheat list in ESYS. Normally I do everything "manually" so that I know after that where I made changes and can undo them. But for those codings I couldn't find how to do them "manually" so I used that list. The list, as far as I know, has only the option to "code" something but not to undo what done ... or maybe I missed something ? I wouldn't flash the whole car to stock now just for that, cus I already made a lot of changes ... |
|
Appreciate
0
|
12-18-2018, 05:37 AM | #9 |
First Lieutenant
50
Rep 308
Posts |
The delay for the mirror folding as well tailgate closing/opening can be changed with bimmercode (easy way) or with e-sys. I changed my 3 second delay to 1 second using bimmercode.
__________________
2017 F31 328d xDrive
M Sport M Performance |
Appreciate
0
|
12-19-2018, 06:07 AM | #10 |
New Member
1
Rep 17
Posts |
Hi there, thanks for answering. I got E-sys, no bimmercode.
Can you maybe tell me where to change that to 1 second please ? Thank you in advance ! |
Appreciate
0
|
12-19-2018, 07:36 AM | #11 | |
First Lieutenant
50
Rep 308
Posts |
Quote:
FEM_BODY 3053 KOMFORT_SCHLIESSEN werte = 00 (werte 0F is default) Delay time to activate Convenience Closing via Key Fob or CA. (HEX)
__________________
2017 F31 328d xDrive
M Sport M Performance |
|
Appreciate
0
|
12-20-2018, 07:48 AM | #12 |
New Member
1
Rep 17
Posts |
Thx ,I'll try it tonite !
Nope, didn't tried that yet, I just tried HU_NBT/3000 HMI/KEY_CONF_TAILGATE in HU_NBT, not in FEM_BODY. Hope it works, tho I don't think I got CA ... I mean I can't open my trunk with my foot ... Will check and report back, thank you ! |
Appreciate
0
|
01-16-2019, 06:20 AM | #13 |
New Member
1
Rep 17
Posts |
Wanted to try it today, but unfortunately ESYS Launcher Premium is not working anymore Is there any solution yet ?
And BTW, KOMFORT_SCHLIESSEN means comfort closing and I was talking about opening the trunk ... |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|