02-23-2022, 07:49 PM | #1 |
Registered
0
Rep 3
Posts |
2017 340i Wheel and Rim Fitment
Any help and insight would be greatly appreciated. I have a 2017 Bmw 340i Xdrive. My front tire size is 225/40r19xl and my rear is 255/35r19xl. I want to get my rims flush with my fenders which are stock and the car is stock with no suspension mods etc. The rims I'm wanting to get are as follows. Front is 19x9 ET30 and the rear is 19x9.5 ET33. Am I going to have scraping or rubbing..is this going to fit without issues?
|
02-24-2022, 11:03 AM | #2 | |
Captain
246
Rep 715
Posts
Drives: 2021 X3 M40i
Join Date: Jun 2012
Location: Santa Maria, CA
|
Quote:
Second, I'm running factory 437M's which are 19x9 ET29 and 19x10 ET40 with no rubbing (and I"m lowered on H&R SuperSport Springs). If you aren't lowered, then it should not be an issue as your offsets are pretty close to what I"m running, especially on factory size tires.
__________________
|
|
Appreciate
1
Billfitz8243.00 |
02-26-2022, 10:00 AM | #3 |
Registered
0
Rep 3
Posts |
Thanks for the reply! Yes your offsets are very close to mine. Should I be concerned running those rims and tires if I do decide to lower in the future? Also would I need to get longer bolts or can I keep using the stock ones? I'm new to this forum how do I switch this thread to the correct category?
|
Appreciate
0
|
02-26-2022, 02:24 PM | #4 |
Lieutenant General
8243
Rep 16,079
Posts |
Copy it, then post it again in https://f30.bimmerpost.com/forums/fo...play.php?f=423
That's after you've searched there to see if your question has already been answered. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|