02-22-2014, 07:01 AM | #1 |
Registered
94
Rep 4
Posts |
Fsc code Generator
Hello,
I have seen on the internet that there is a fsc code generator for navigation systems. Is there somebody who has some information on this or even workt with it. I am very interested how its works. The fsc code from BMW is very expensive so if i can save a buck it is Always welcome. |
Appreciate
10
|
02-26-2014, 08:40 PM | #2 |
Banned
116
Rep 653
Posts |
It costs thousands. What are you trying to accomplish?
- |
Appreciate
2
FlorinQCK-2.50 David Kunitz924.50 |
03-02-2014, 02:18 AM | #4 |
Captain
51
Rep 808
Posts |
This one is 70 pounds if this is what you're speaking of...
http://bmwcoders.com/forum/showthrea...=7112#post7112 |
Appreciate
4
|
03-03-2014, 07:55 PM | #5 | |
New Member
40
Rep 16
Posts |
FSC DIY
Quote:
FSC Generator Download Password: "Eintracht_Frankfurt" It generates the FSC in three steps. But you have to change the "year-parameter" in the batch-file to a later map (e.g. 2016 - or even later - instead of 2014), then it works perfectly. The Default 0x06 for 2014 does not work, but 0x09 does! In adition, you'll need an ENET cable and a working EDIABAS intallation (32-bit - It does not run on 64-bit Windows!) Look for the intruction Video on Youtube: Last edited by Dr.Ho; 03-04-2014 at 01:28 AM.. |
|
Appreciate
10
|
03-03-2014, 08:01 PM | #6 | |
Banned
116
Rep 653
Posts |
Quote:
That person is selling a FSC code for 70 not the generator. Last time I looked, NBT FSC generators were still pretty expensive just like CIC generators were when very few people had one/ them. Where it the OP? If you are looking for a FSC code (activation code) to upgrade your maps, which it sounds like what you were after, contact me or others for one. They are inexpensive for NBT and close to free for CIC (of free if you do it yourself, thanks Dr.Ho). |
|
Appreciate
3
|
03-14-2014, 05:11 AM | #11 | |
New Member
6
Rep 5
Posts |
Quote:
|
|
Appreciate
1
FlorinQCK-2.50 |
03-14-2014, 02:04 PM | #13 | |
New Member
40
Rep 16
Posts |
Quote:
So, try 0x09 or higher for the second parameter in the Batch-File. |
|
Appreciate
1
FlorinQCK-2.50 |
03-14-2014, 06:10 PM | #15 | |
Lieutenant Colonel
291
Rep 1,892
Posts |
Quote:
For CIC: The North American Premium region is 0x2d North American Premium 2014-1 is map code 0x07 I don't know what they are for NBT based systems. |
|
Appreciate
1
FlorinQCK-2.50 |
03-15-2014, 05:06 AM | #17 |
New Member
6
Rep 5
Posts |
I was able to generate a working code. This works! I installed the North America Premium 2014-2 without any problems.
I used 0x2D and 0x08 in my fsc.bat file: c:\EC-APPS\fsc a.hex 0x2D 0x08 > code.txt Thanks for the FSC Generator! |
Appreciate
2
FlorinQCK-2.50 |
03-31-2014, 06:39 PM | #19 |
Captain
79
Rep 972
Posts |
Hi - I have this s/w (the SWID reader) and one-stop ENET cable. Car gives me an IP address that I put in EDIABAS.ini alongside interface = ENET.
But for the life of me I can't get a connection in that or any other tool for that matter. ODB cable is fine but of course is no good for this purpose. e92 car but am told CIC connection needs this cable. please advise if you can on software setup.. Chris |
Appreciate
1
FlorinQCK-2.50 |
04-03-2014, 05:19 AM | #20 | |
Registered
94
Rep 4
Posts |
Quote:
I updated the map to europa 2014. |
|
Appreciate
1
FlorinQCK-2.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|