02-25-2020, 12:01 PM | #1 |
New Member
2
Rep 14
Posts |
Coding cruise control into LIMIT
Hey guys!
After my F31 got broken into, and the entire nav stolen, I finally have it back. I immediately started coding it back to the options I previously had. Unfortunately, I ran into a problem: somehow, I cannot (re)code my "SET" button on my steeringwheel to operate as a limiter. I use ESYS and this is the problem I run into. The following lines I need to code: KOMBI 3003 SLD_ENABLE ICM 3000 SLD_Funktion aktiv ICM 3000 C_Umschaltung_ACC_DCC zugelassen ICM 3000 LDM_SET_Taste nur_SET__O However, my vehicle only shows me the KOMBI and the C_Umschaltung_ACC_DCC zugelassen option. The other two options aren't even in the list to code. Needless to say, with coding those two, the button still acts as a cruise control button, and not as the LIMIT button. Does anyone have a feint idea what can cause this? Or how I can solve this? Thank you in advance! |
02-25-2020, 12:50 PM | #2 |
Colonel
588
Rep 2,302
Posts |
This happens when you only search for exactly this value.
If you enter "SLD_FUNKTION" in the search above, you will find the value that is actually called C_SLD_FUNKTION. I didn't find the last value either. It works without it. |
Appreciate
0
|
03-04-2020, 06:45 AM | #4 |
New Member
2
Rep 14
Posts |
Thank you again man, that totally worked! You saved me a trip to the local coder again!
It is the 2nd time you've greatly helped me. Is there any way I can buy you a beer or something? You got any donationlinks running? |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
coding, esys, lim, lim function, limiter |
|
|