Help Identify Brakes

XxThe_RemedyXx · 09-17-2018, 01:18 PM

Hi all -

It's time for my rotors and pads to be swapped and I'm having a little trouble trying to figure out diameter of rotors on my 14 335i xDrive Sportline. RealOEM shows 340X30 up front and 330X20 in the rear. Attached are a few pictures of my current setup. I'm pretty sure I have front Brembo calipers and rear Bosche calipers but just wanted to make sure. Any feedback would be greatly appreciated. Thinking of going Stoptech for rotors and Hawk for pads on the advice of Mike at XPH. Reading a lot of good stuff about them.

Logicoeur · 09-17-2018, 05:37 PM

Specs are correct. I have the same setup. M-sport not m-performance.

XxThe_RemedyXx · 09-17-2018, 05:47 PM

Quote:

Originally Posted by Logicoeur

Specs are correct. I have the same setup. M-sport not m-performance.

You sir are a gentleman and a scholar. Thank you!

McQueen2014 · 09-18-2018, 12:07 AM

Turner Motorsports has a couple great articles on this

https://www.turnermotorsport.com/t-b...ke-Differences

https://www.turnermotorsport.com/t-b...ke-Differences

Milkman670 · 09-19-2018, 12:24 AM

Just got these delivered today, 370mm front and 345mm rear. minimum 18" msport rims needed

Logicoeur · 09-19-2018, 01:51 PM

Quote:

Originally Posted by Milkman670

Just got these delivered today, 370mm front and 345mm rear. minimum 18" msport rims needed

Cost and source? I know of the typical places just asking for reference

Milkman670 · 09-19-2018, 02:28 PM

Quote:

Originally Posted by Logicoeur

Cost and source? I know of the typical places just asking for reference

$3,200 cdn all in with shipping and duties off of ebay. Dealer price would have been $4,700 cdn + install

I think it was $1800us + $400us for rear rotors with free shipping

09-17-2018, 01:18 PM	#1
XxThe_RemedyXx Colonel 967 Rep 2,653 Posts Drives: 2016 340i xDrive Join Date: Aug 2009 Location: Westchester, NY iTrader: (0)	Help Identify Brakes Hi all - It's time for my rotors and pads to be swapped and I'm having a little trouble trying to figure out diameter of rotors on my 14 335i xDrive Sportline. RealOEM shows 340X30 up front and 330X20 in the rear. Attached are a few pictures of my current setup. I'm pretty sure I have front Brembo calipers and rear Bosche calipers but just wanted to make sure. Any feedback would be greatly appreciated. Thinking of going Stoptech for rotors and Hawk for pads on the advice of Mike at XPH. Reading a lot of good stuff about them. Attached Images __________________ 2016 340i xDrive - BM3 Stage 2 93 OTS - xHP Transmission Tune Stage 2 - B58TU HPFP - Bilstein B14 - VRSF Catless DP - Kyostar CAI
	Appreciate 0 Tweet Quote

09-17-2018, 05:37 PM	#2
Logicoeur Lieutenant Colonel 990 Rep 1,934 Posts Drives: F30 335i xDrive Join Date: Feb 2018 Location: Boston iTrader: (0)	Specs are correct. I have the same setup. M-sport not m-performance. __________________ F30 335iX \| Remus Axleback \| Fabspeed Catted DP \| VRSF Comp IC \| 18X9 ET35 19lb MT1 \| 255/40/18 ECS \| Ohlins RT Millway Street \| Millway Control Arm Bushings \| Turner Endlinks \| TMH 75mm 14x1.5 Studs \| BMW MPerf LSD \| XDelete \| Pipercross Filter \| MHD Stg2 93
	Appreciate 0 Quote

09-18-2018, 12:07 AM	#4
McQueen2014 Private First Class 75 Rep 106 Posts Drives: 2014 335i xDrive M Sport Join Date: Aug 2018 Location: Vancouver, BC, Canada iTrader: (0) Garage List 2014 BMW 335i xDrive [0.00]	Turner Motorsports has a couple great articles on this https://www.turnermotorsport.com/t-b...ke-Differences https://www.turnermotorsport.com/t-b...ke-Differences
	Appreciate 0 Quote

09-19-2018, 12:24 AM	#5
Milkman670 Private First Class 229 Rep 149 Posts Drives: 2018 330i F31 MSport II Join Date: Jul 2018 Location: Alberta iTrader: (0)	Just got these delivered today, 370mm front and 345mm rear. minimum 18" msport rims needed Attached Images __________________
	Appreciate 1 Korvo368.00 Quote