[SystemOfUrdaW]

hi Bimmers
this thread might have been discussed previously but i didn't find anything yet on the forum.
I got my car back from the shop after nearly 3 months.
The wait was long really long.

My problem is that i had adaptive suspension before and now i'm on Bilstein B8 with Eibach lower springs.
I'll post pictures in few weeks, i wait for springs to settle a bit.
I can't use Sport, Sport + and even Eco mode.
What are my options to bypass that problem???
I've been told that i need an emulator installation.
Any coding possible?
Bimmercode or Esys?


Edit
Yesterday i code out my EDC Thanks to "Shaw" and "Help me Diy" from youtube using Esys

I'm in Montreal area.

I really need your help and knowledge on that matter.
Thanks yall
have a nice one.

[Logicoeur]

Code edc out or buy a cancellation kit. Quick search for either should return what you need

[SystemOfUrdaW]

thanks for info

[fazi13]

Any reason why you didn’t get a compatible suspension solution to begin with?
When i was test driving the cars without the adaptive m suspension were way worse...

[SystemOfUrdaW]

Originally Posted by fazi13

Any reason why you didn’t get a compatible suspension solution to begin with?
When i was test driving the cars without the adaptive m suspension were way worse...

Bilstein B14 were not low enough, B16 were way too expensive.
The solution i chose was the better fit for me.
I lose on confort but i gain in handling.
Yesterday i code out my EDC Thanks to "Shaw" and "Help me Diy" from youtube.