12-08-2018, 09:39 PM | #486 |
Private
19
Rep 80
Posts |
Yeah I've checked everything with a multimeter aside from fbas going to nbt. I'm going to check again as I didn't let me car sleep after I coded the new rem, hopefully it'll magically appear as I have no other ideas aside from trying a differ kcan source which I really don't want to do.
|
Appreciate
0
|
12-09-2018, 09:06 AM | #487 | |
New Member
0
Rep 26
Posts |
Quote:
Change the camera or cable? Is there a way to control the video camera? |
|
Appreciate
0
|
12-09-2018, 04:52 PM | #488 | ||
Captain
130
Rep 765
Posts |
Quote:
|
||
Appreciate
0
|
12-09-2018, 07:09 PM | #489 |
Captain
172
Rep 740
Posts |
Within esys, do you see trsvc in the list of ecus?
__________________
Did my post help? Click "Appreciate!"
FOR SALE! Sport line Steering wheel with heated, paddle shifter, vibration motor, no airbag | EDM Bi-Xenon adaptive headlights (SOLD) | surround view retrofit kit (sold) | KAFAS2 camera and ECU | FLA camera(sold) | 6WB cluster (SOLD) |
Appreciate
0
|
12-10-2018, 06:38 AM | #490 |
New Member
0
Rep 26
Posts |
|
Appreciate
0
|
12-14-2018, 05:36 AM | #492 | |
Registered
0
Rep 3
Posts |
Quote:
All set up and coded now. Seem to be working nice. |
|
Appreciate
0
|
12-15-2018, 12:43 PM | #493 |
New Member
0
Rep 7
Posts |
Hi Everyone,
I've just successfully completed my retrofit. Couple things I want to share: - built my own harness based on pigtails that came with controller and camera - works just fine; - I added 3AG to FA but I did not VO code any module; I've codded the settings mentioned in a prior post; surprisingly it worked before even injecting the CAFD to the controller. I still injected the CAFD to the controller in order to clear related errors reported and read with ISTA+. Thank you all for sharing your experiences! |
Appreciate
0
|
12-27-2018, 04:35 AM | #494 |
New Member
2
Rep 7
Posts |
Hi guys I retrofitted the reversing camera on my 2015 pre lci mini cooper s f55. I did all the cabling like mentioned here:
https://www.newtis.info/tisv2/a/en/f...era/1VnXhE6RKE Nbt: 21 23 24 Terminal: 9 22 13 Power: Fusebox f55 Ground: trunk Measured all cables from camera to terminal box and power all seems to work. The selles says he needs to see icam2 in the ecu tree but its not showing. I tried adding 3ag on the vo and coded it over all ecus initially saw the reversing visuals but not picture, just blank. Am i doing somethibg wrong? Or is the coding really different on thia car. Also this car does not have trsvc. The selles says the camera itself is the module. He thinks maybe the camera is faulty. I think maybe the coding is just wrong. Any help is appreciated. |
Appreciate
0
|
01-05-2019, 10:03 AM | #495 |
Enlisted Member
13
Rep 33
Posts |
Hello there!
Thank you for this thread. With your help I installed Top view on my F25 but used TRSVC module with 5 connections to camera. I do not want to install and use Side View cameras (there are no OEM harness for f25 body). Everything are coded and working correctly except Rheingold errors: 800DBA - side view camera, right, not connected 800BDB - side view camera, right, not learned 800DBF - side view camera, left, not connected 800BDE - side view camera, left, not learned Is it possible to code TRSVC and disable SV cameras? Hera are many options: |
Appreciate
0
|
01-05-2019, 07:55 PM | #496 | |
Captain
130
Rep 765
Posts |
Quote:
|
|
Appreciate
0
|
01-07-2019, 09:38 AM | #497 |
Enlisted Member
13
Rep 33
Posts |
I found next parameters in the TRSVC code:
>3009 TVinh/OnlCalibTrash/Vsync/Timeout/Embl/HeatEI, 58 >>Online calibration DEADJUSTED DTC threshold >>>initwert >>>Werte=03 >>Online calibration NOT CALIBRATED DTC threshold >>>initwert >>>Werte=32 Is it connected with all TRSVC cameras? I believe this may help to disable connection and learned state for all connected cameras. |
Appreciate
0
|
01-09-2019, 08:46 PM | #498 | |
New Member
5
Rep 23
Posts |
Quote:
|
|
Appreciate
0
|
01-10-2019, 08:20 AM | #499 |
Captain
175
Rep 614
Posts
Drives: 2016 F36 M Sport
Join Date: May 2015
Location: Houston, TX
|
Do you absolutely need the rear parking sensors in order to retrofit the OEM back up camera? I know the OEM Integration/MMI cameras from Bimmertech are much cheaper, but I don't really like the aftermarket look of them.
__________________
2016 BMW 428i Gran Coupe, M Sport, Glacier Silver Metallic
|
Appreciate
0
|
01-19-2019, 10:49 AM | #500 |
New Member
0
Rep 7
Posts |
hi just installed the BMW OEM reverse camera, followed the info from all the posts in this forum.
camera works but shows "reverse camera faulty" on dash?? 2015 420d new camera, new wiring loom, used trsvc from another vehicle,(sold as fully working) function is ok video signal all good, done coding 3ag, then coded hu nbt, fem body and trsvc. any help ? do I need to remove errors with Rheingold thanks for your assistance update - used Rheingold to calibrate reverse camera - warning on dash has gone. finger's crossed. |
Appreciate
0
|
01-21-2019, 11:04 AM | #501 | |
New Member
9
Rep 22
Posts |
Quote:
Thanks for the awesome guide for placing the control units in the trunk. I accidentially ALSO bought the smaller cable for F10, but this trunk installation helped a lot! Like many others, i also had no wires to tap in PIN 51 and 52 in the REM unit, but just them plugged in instead of using a micro connector. (Bought a connector for plugged the wires directly into the socket). Other than that, i just followed the installation manual from BMW, which was correct all the way (except for the PIN 51/52 part, plus my RED wire for the HU was actually YELLOW) |
|
Appreciate
0
|
01-27-2019, 06:02 AM | #502 |
Enlisted Member
16
Rep 32
Posts |
Hi,
I saw that in bmwetk there is a new camera number after 09/2017 Old camera number is 66539240351 (what we all use) where as the new number after end of 09/2017 is 66539472921 Has anyone investigated if the new camera brings anything better - image quality, low light visibility etc? They should both be compatible with the main unit since both newer and older cars connect to one and the same TSRVC module number. This could be a very easy straight forward upgrade to all rear view camera cars. Last edited by radoslavp; 03-19-2019 at 08:41 AM.. |
Appreciate
0
|
01-27-2019, 07:19 AM | #503 |
Brigadier General
258
Rep 3,815
Posts |
good spot be good to know mine is abotu 3 years old and I can see picture loosing quality so be good upgrade
__________________
F30 335i M Sport - now departed
|
Appreciate
0
|
02-12-2019, 02:18 PM | #504 |
Lieutenant
136
Rep 525
Posts |
Quote:
Wich nut size you use it for control unit? Thanks in advance |
Appreciate
0
|
02-12-2019, 02:31 PM | #505 |
Brigadier General
258
Rep 3,815
Posts |
the nylon lock was one I found in the boot on another part and then reordered same one. The metal one on left I think was 8mm not sure as just went into spares and found one that worked sorry
__________________
F30 335i M Sport - now departed
|
Appreciate
0
|
02-15-2019, 02:01 AM | #506 |
Lieutenant
136
Rep 525
Posts |
Thanks magic77!
I have one problem more! I broke pin conector 23 so i need new one someone knows part number? And 51 and 52 on fem is empty i need part number for pin conector too. Thanks |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|