05-20-2018, 06:41 AM | #1 |
Enlisted Member
12
Rep 48
Posts |
FS: F30 NBT EVO CID 8.8 inch screen
I'm hereby selling a 8.8 inch CID for a F30 with NBT EVO. Condition: light usage marks on plastics, glass is break AND scratch free Reason for selling: Screen wasn't compatible with my headunit I'm asking for 375 EUR or 440USD Shipped to anywhere in Europe or the US (incl. Tracking). DM me if you're living anywhere else and we can come to an arrangement. |
05-20-2018, 11:56 AM | #3 |
Enlisted Member
12
Rep 48
Posts |
Well, I currently have a HU_ENTRYNAV with the 6,6inch display. I wanted to upgrade to the larger 8,8. I accidentally bought the wrong part number. This is the latest display for the NBT EVO which has 12V, mine runs on 7,5V apparently... I'm going to try something to overcome that, but till then it's for sale
|
Appreciate
0
|
05-20-2018, 12:10 PM | #4 | |
Banned
4502
Rep 10,473
Posts |
Quote:
The newer NBT EVO run on 7.5V As thus, this is appears NOT to be a NBT EVO display as listed, but a NBT Display. |
|
Appreciate
0
|
05-20-2018, 12:37 PM | #6 |
Enlisted Member
12
Rep 48
Posts |
If you don't have the nav, it's not possible to have the larger screen. You have to retrofit a new NBT EVO headunit with navigation for this screen to work
|
Appreciate
0
|
05-20-2018, 12:43 PM | #7 |
Enlisted Member
12
Rep 48
Posts |
Oh really... then I had them confused. Sorry for the noob mistake.
Just look up the part number and you'll see it's a NBT-EVO screen. If it were a NBT display, it would've just worked on my headunit... but it didn't. I tested it on my moms 330e WITH HU_NBTEVO and it did work as expected. Also, the part numbers matched between the 330e's screen and mine... |
Appreciate
0
|
05-20-2018, 03:46 PM | #8 | |
Banned
4502
Rep 10,473
Posts |
Quote:
Perhaps Belgium did not receive NBT EVO in 2016 MY. Then again, if that realoem info is to be believed, it should work with ANY F3x from the 2011-2013 CIC to the 2014-2015 NBT to 2016-2018 NBT EVO. Last edited by IK6SPEED; 05-20-2018 at 03:51 PM.. |
|
Appreciate
0
|
05-20-2018, 04:40 PM | #9 | |
Enlisted Member
12
Rep 48
Posts |
You could be right man, I don't know. I just know things from what I read on the forums...
EDIT: I did some further digging and I am indeed right... There is some kind of mistake in ETK. If you check the part nr's the screen is "exchangeable" with, it suddenly says it's not compatible. And that last fact I can confirm... It's just saying "No Signal" all the time even with coding the correct parameters, so it should be a voltage issue. I'll try and tinker around with a voltage regulator and see what it does... AGAIN: this item will be still for sale in the meantime Quote:
Last edited by Beau2795; 05-20-2018 at 04:47 PM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
cid, f30, nbt, nbt evo |
|
|