06-26-2022, 09:10 AM | #1 |
Registered
1
Rep 1
Posts |
BMW F36 airbag faults
Please help!!
I bought a front end damaged bwm 420d 2017, having replaced the bumper and headlight and roof air bag and driver/passenger airbag and seat belt tensioner driver side. I’m getting parking fault when trying to reserve, also parking sensors not working. Airbag faults for driver and passenger airbag and roof airbag. Have tried a few machines to delete codes but not been successful. I went to bmw to see if they can help, they did a free diagnostic test I have attached the copy. They did inform me that it will need to be coded??!! Not sure what that means. Also, when braking the car does shake, did show a ABS fault, not on the dash, but when do I bnb a diagnostic test. Any advice would be much appreciated. Thanks 27FA00 Information: Ambient temperature, signal: Open or short circuit to B+ 801C20 ZGM: central fault memory full - no control-unit fault 8032D0 Ultrasonic sensor, front outer left, signal line: Line disconnection 804483 Rain-light-solar-condensation sensor: Fault condensation sensor 930901 Driver's airbag, interval stage 1: Short-circuit to earth 930913 Front passenger airbag, stage 1: Short-circuit to earth 930925 Driver's seat belt tensioner: Short-circuit to earth 930937 Front passenger's seat belt tensioner: Short-circuit to earth 930979 Driver's side airbag: Short-circuit to earth 93097F Front passenger's side airbag: Short-circuit to earth 930985 Head airbag, left: Short-circuit to earth 93098B Head airbag, right. Short-circuit to earth 930991 Safety battery terminal: Short-circuit to earth 930ABD ACSM: Internal fault B7F328 CB: Microphone 1: Open circuit B7F655 Instrument panel: Outside temperature sensor Short circuit to B+ CD9402 Signal (ambient temperature, 0x2CA) invalid, transmitter KOMBI D0142C Instrument panel interface (ambient temperature, 252.1.4): Signal invalid D3542C KOMBI interface (outside temperature, ID: 0X2CA): Signal invalid EOECOF KOMBI interface (ambient temperature, 0x2CA) signal invalid E71401 Signal (ambient temperature, 0x2CA) invalid, transmitter KOMBI E71402 Signal (ambient temperature not filtered, 0x2CA) invalid, transmitter KOMBI E71431 Signal (fogging on windscreen, 0x2D1) invalid, transmitter FEM / BDC E71432 Signal (temperature of heated windscreen, 0x2D1) invalid, transmitter FEM / BDC S 0777 Engine tuning detected by the automated test |
Post Reply |
Bookmarks |
|
|