[ozymandias435]

Hey all,

Trying to decide between 265/35/19 and 275/35/19 for the rear with my new wheels.

Car is 2015 435 GC M sport

Wheels are 19x10 et 45 custom concavity Vossen.

Also tire is going to be Michelin Pilot Sport 4s.

EDIT: Anyone running the 275/35/19 with 19x10 with that offset or similar? Any rubbing?

Thanks for any help,

Chase

[JuicedboXed42]

what is your question or concern? I have that size on my car. rim size is 19 x 9.5 though. et20. I get some rubbing if I have people in the back.

[ozymandias435]

Originally Posted by JuicedboXed42

what is your question or concern? I have that size on my car. rim size is 19 x 9.5 though. et20. I get some rubbing if I have people in the back.

Sorry didn't realize I never added a question into the post. Updated it.

Will the 275 35 fit without rubbing on the 19x10 et 45 or similar offset

[weehe126]

275/35/19 will be no issue with 10" et 45. The stock M3/4 rear rims are et 40 and I have no issues on a stock 340i. Et 45 would be less aggressive.

[ozymandias435]

Originally Posted by weehe126

275/35/19 will be no issue with 10" et 45. The stock M3/4 rear rims are et 40 and I have no issues on a stock 340i. Et 45 would be less aggressive.

Thank you! How much poke am I looking at here? Do you have a pic of your rear fitment?

[weehe126]

I haven't taken any pictures, but with et 45 I'd expect no poke, flush with fender.

[Tommi_Mav]

Originally Posted by weehe126

275/35/19 will be no issue with 10" et 45. The stock M3/4 rear rims are et 40 and I have no issues on a stock 340i. Et 45 would be less aggressive.

+1
I also have the stock M4 M437 wheels on a stock 435dx and no problem at all.
The ET45 wheels will poke less from the fender. You can also check on the willtheyfit.com site. They have a free calculator. Here's what I got for the comparison you want: LINK

[Danielf30]

Would these specs fit on my 2018 340i ?

19 x 9 ET29 255/35/19
19 x 10 ET40 275/35/19

[weehe126]

Originally Posted by Danielf30

Would these specs fit on my 2018 340i ?

19 x 9 ET29 255/35/19
19 x 10 ET40 275/35/19

Yes

[lonaman]

Can I run 275/35/18 on 18x9.5 ET35 wheels on a 2016 340i with no modifications? I don't want to roll my fenders.

[Shaggz]

Originally Posted by lonaman

Can I run 275/35/18 on 18x9.5 ET35 wheels on a 2016 340i with no modifications? I don't want to roll my fenders.

i am running 275/35r19 19x9.5 et 45... i tried a 5mm spacer and rubbed.. not sure i would even attempt et 35

[weehe126]

Originally Posted by lonaman

Can I run 275/35/18 on 18x9.5 ET35 wheels on a 2016 340i with no modifications? I don't want to roll my fenders.

A 9.5" et 35 would be 1mm further in (away from the fender) compared to the 10" et40 in this post. You would most likely still need to put the stock camber adjustment at max/near max (~2°). 275/35/18 is one profile size smaller than normal. It will cause a larger wheel gap to the fender. 275/40/18 would be better. This would be considered a somewhat aggressive fitment and the chance of rubbing would depend on the tire brand/model.

[lonaman]

Thank you!

[dbldangertilt]

i'd go with 275s unless you like the slightly stretched look

I'm on 19x10 et 45 ff03s with 275/35/19 PS4S... no rubbing at all on stock m sport suspension. 2016 f36 rwd.