[jimbojellybop]

Wondering if there’s a safe way to transfer these pins over to my new trim kit.
Purchased them on Facebook and do not come with.

[Billfitz]

Look them up at realoem.com

[YASBBYM3]

Originally Posted by Billfitz

Look them up at realoem.com

You know (or should) that BMW doesnt sell individual pieces to pre-assembled parts like this. They want you to replace the entire part.

[Oksamit78]

Originally Posted by jimbojellybop

Wondering if there’s a safe way to transfer these pins over to my new trim kit.
Purchased them on Facebook and do not come with.

I've never seen these dash trim pins sold separate. The E generation had them replaceable, but they are of different shape design:


P/No 51458266808

[fortythirtyfive]

Originally Posted by jimbojellybop

Wondering if there’s a safe way to transfer these pins over to my new trim kit.
Purchased them on Facebook and do not come with.

I had this when I bought a donor trim to carbon skin, some of the pins were missing.

I used a small flat screw driver to slowly pry them out from the bottom up, they're pretty stubborn especially if you can't twist them by hand; it's just a case of working them back and forth.

Worst case scenario buy a real cheap dash trim from eBay and steal those - my donor one was £15.

[jimbojellybop]

Thak you guys for the feedback. Always appreciated.