10-25-2018, 12:43 AM | #155 | ||||
New Member
0
Rep 7
Posts |
Quote:
Quote:
|
||||
Appreciate
0
|
10-26-2018, 02:13 PM | #156 |
New Member
0
Rep 7
Posts |
guys is there any guide for the coding? I think the wiring is very easy see the attached for some additional detail.
LEFT Headlight Connector FEM Connector Pin 1 Pin 48 A173*3B Pin 2 Ground Z10*1B Pin 3 Front Fuse Box Pin 4 Empty Empty Pin 5 Empty Empty Pin 6 Empty Empty Pin 7 Empty Empty Pin 8 Pin 53 A173*4B Pin 9 Pin 21 A173*2B Pin 10 Pin 20 A173*2B Pin 11 Empty Empty Pin 12 Empty Empty |
Appreciate
0
|
10-26-2018, 08:25 PM | #157 | |
Captain
130
Rep 765
Posts |
Quote:
|
|
Appreciate
0
|
10-26-2018, 09:05 PM | #158 | |
Captain
130
Rep 765
Posts |
Quote:
This is what I used, sorry idk what I uploaded last time. |
|
Appreciate
0
|
10-27-2018, 12:38 AM | #160 |
Captain
130
Rep 765
Posts |
No problem man Goodluck. Coding isn’t that bad as long as u kno what ur doing. U may have to flash ur fle’s with esys and psdzdata full but I didn’t. Idk if that’s bc mine were used or what but if u can’t code them then u prolly have to flash first. Goodluck.
Ps I heard some ppl having to initiate led’s With ista+ if all else fails then try that too. Again I didn’t have to but heard of ppl needing too. |
Appreciate
0
|
10-31-2018, 12:33 AM | #161 | ||||
New Member
5
Rep 25
Posts |
Quote:
Quote:
I just installed the headlights and its just right how you saying. I start the car and the headlights turn on, but in 1-2 seconds, it turn off by itself. What do i need to do? |
||||
Appreciate
0
|
11-04-2018, 12:08 PM | #162 |
Brigadier General
1786
Rep 3,055
Posts |
Hello,
Where in front fuse box PIN3 should be plugged in? I don't have socket Z7*10B in front fuse box, can I connect it to different one? How you guys did that? Thanks |
Appreciate
0
|
11-07-2018, 06:39 AM | #163 |
Brigadier General
1786
Rep 3,055
Posts |
Did anyone have problem with wdbi_plain error when coding FLEL? I’m coding it with modified FA(zeitkriterium and 552 in Salapa Elements).
e-sys and ista see FLE 43(ecu with fault memory) Thanks! |
Appreciate
0
|
11-07-2018, 08:58 PM | #164 |
Captain
130
Rep 765
Posts |
|
Appreciate
0
|
11-08-2018, 09:07 AM | #165 |
Brigadier General
1786
Rep 3,055
Posts |
Ok figure it out.
They work fine in F82. Strange, that i also have STMR AND STML in ista shown in red. How to get rid of them in ista tree? Change FA in VCM?(i didnt do it) |
Appreciate
0
|
11-08-2018, 11:47 AM | #166 |
New Member
0
Rep 6
Posts |
Hi, I made a wiring harness for a 552 adaptive led, all made same as official bmw retrofit.
I have brand new headlights with brand new modules. My car is 11/2011 with regular halogen lights. I added 552 code to VO, but problem is that FLE modules should come after coding VO but they don't. Do You know maybe where is problem ? Do I need to update I-step because my vehicle is from 11/2011, do I need somehow to teach-in modules because they are brand new unused ? Thanks in advance. |
Appreciate
0
|
11-08-2018, 12:27 PM | #168 |
New Member
0
Rep 6
Posts |
|
Appreciate
0
|
11-09-2018, 03:25 PM | #169 |
Brigadier General
1786
Rep 3,055
Posts |
|
Appreciate
0
|
11-14-2018, 06:08 AM | #170 | ||
New Member
5
Rep 25
Posts |
Quote:
I start up the car and both headlights works for 1-2 seconds and then they turn off by itself. And just remain the passenger side DRL on with the indicator on; and the driver side just the indicator on with the DRL lights off. Also, both indicators stay on, not blinking and are flicking like there is not enough power. What do i need to do now? I havent do the retrofit wiring yet. |
||
Appreciate
0
|
11-14-2018, 06:58 PM | #171 | |||
Captain
130
Rep 765
Posts |
Quote:
|
|||
Appreciate
0
|
03-04-2019, 12:15 PM | #173 |
Private
5
Rep 85
Posts |
|
Appreciate
0
|
03-14-2019, 07:42 AM | #174 |
New Member
2
Rep 7
Posts |
Hello,
so where did you put new wires for K-CAN2 in FEM??? for left headlight: Pin 9 from headlight to Pin 21--A173*2B Pin 10 from headlight to Pin 20--A173*2B For right headlight: Pin 9 from headlight to Pin 50--A173*8B Pin 10 from headlight to Pin 49--A173*8B When i'm putting these wires,it didn't work,nothing at all. Even worser,KOMBI,HU-ENTRY are not working. How do You solved that?? F30 2013/07 Already have newest i-Level, edited zeitkriterium to 07/2015, added 552(adaptive),coded FEM,REM.ESYS not show any FLE's. ISTA shows just one FLER block... Thanks. |
Appreciate
0
|
03-15-2019, 12:25 AM | #175 | |
New Member
2
Rep 7
Posts |
Quote:
Had bad contact on left headlight CAN-Low, everything working fine now,looks amazing) Thank You |
|
Appreciate
0
|
07-23-2019, 12:28 PM | #176 | |
General
10436
Rep 40,739
Posts
Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX
|
Quote:
__________________
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|