05-17-2023, 02:31 PM | #1 |
Citizen of ///M Town
49
Rep 75
Posts |
BBS RI-A Pic Request
Looking at BBS RI-A 18x8.5 ET34 for a 255/40R18 square setup. Does anyone have them on their car and can share the concavity of these wheels? Even though I'm aware that they won't be as concave as 10.5 wheels on E9x M3s becasue of narrow width and less agressive offset I hope they have at least a little depth. The worst I can imagine is that they will have spokes poking out like the 8.5 ET40 models. There are some pics of 18x8.5 on the web but none of them specify ET so I still have hope that the wheels are not flat pancakes. Any help will be appreciated. Bonus points for pics on F3x chassis.
|
05-19-2023, 10:48 PM | #2 |
Brigadier General
3008
Rep 4,259
Posts |
https://f30.bimmerpost.com/forums/sh...5&postcount=56
https://www.conceptmotorsport.com/?p...ries-grancoupe https://www.craft-web.co.jp/blogs/ha...2%92%E7%B5%84/ https://www.studie.jp/endo/144931/ i suggest the staggered fitment 18x8.5 ET34 front, 18x9.5 ET40 rear with 235/45/18 + 265/40/18 or 245/40/18 + 275/35/18 if you are lowered . Last edited by alohasurftoad; 05-19-2023 at 10:57 PM.. |
Appreciate
1
White43548.50 |
05-20-2023, 03:31 AM | #3 |
Citizen of ///M Town
49
Rep 75
Posts |
Wish I could do 245+275 but even MPSS are not available in my location in 275/35R18. Only 19" and above are sold. I'm xDrive and lowered on coilovers so I'm debating going square as performance upgrade but still can't decide if I should give up the looks of nice staggered rear. I don't track my car regularly.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|