05-06-2018, 06:37 PM | #1 |
New Member
6
Rep 15
Posts |
Bilstein B16 (PSS10) Cleaning Suggestions?
I have a set of Bilstein B16 (PSS10) 48-207287 Coilovers removed from the 2015 328i xDrive lease I just turned in.
They've been on the car for 2 1/2 years and have quite a bit of grime and grunge. [NYC Area] I'd like to get them cleaned up and then sell them. Any suggestions on how best to clean them up? Thx, Jim Last edited by jimnov; 05-06-2018 at 07:32 PM.. |
05-07-2018, 09:42 AM | #3 | |
Captain
518
Rep 891
Posts |
Quote:
__________________
328i RWD | MW on CRed Slick Top | 6MT | BM3 | MPE | GPlus FMIC | CSF Radiator | Millway Street Camber Plates & Monoballs | KW V2 6k/18k Swift Springs | F80 LCA/TS | SPL Bump Steer Kit | APEX SM-10 | R-S4 | DS2500 | RBF600 | SS Lines | Past: E36 328is & E38 740i |
|
Appreciate
0
|
05-07-2018, 10:25 AM | #4 |
New Member
6
Rep 15
Posts |
I'm planning to sell the set for $700, plus shipping.
They've been on the 328i XDrive for 2 1/2 years. They have approx. 22000 miles of use on them. I bought them, had them installed and had them removed at AWE in PA. Great shop, by the way! I highly recommend them for your exhaust and suspension needs. According to Bilstein, they typically last 50000 miles before they need to be serviced. So the buyer should expect at least a couple years of maintenance free driving. Last edited by jimnov; 05-07-2018 at 10:31 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bilstein, bilstein b16, bilstein b16 pps10 coilovers |
|
|