[SuhaibD98]

I own a 2014 F30

What K-Can wiring would I have

Or how do I check

[IK6SPEED]

Originally Posted by SuhaibD98

I own a 2014 F30

What K-Can wiring would I have

Or how do I check

You have both.

What circuit are you asking about? IDrive? That’s KCAN 2 in 2014.

[SuhaibD98]

Originally Posted by IK6SPEED

You have both.

What circuit are you asking about? IDrive? That’s KCAN 2 in 2014.

Can i wire in a touch controller then?

[IK6SPEED]

Originally Posted by SuhaibD98

Can i wire in a touch controller then?

Yes, but this is easier

https://www.ebay.com/itm/BMW-F10-F07...r/162664866787

[SuhaibD98]

Originally Posted by IK6SPEED

Yes, but this is easier

https://www.ebay.com/itm/BMW-F10-F07...r/162664866787

Can i use this
https://rover.ebay.com/rover/0/0/0?m...2F262689576519

[SuhaibD98]

Originally Posted by IK6SPEED

Yes, but this is easier

https://www.ebay.com/itm/BMW-F10-F07...r/162664866787

Is there anyway i can confirm that I have a k-can2 for my controller??

[IK6SPEED]

Originally Posted by SuhaibD98

Can i use this
https://rover.ebay.com/rover/0/0/0?m...2F262689576519

You are determined to make it harder and more expensive for yourself than it has to be, huh?

You purchase the y adapter I listed above this ecu

https://www.ebay.co.uk/itm/BMW-F20-F...4/123350407250

Or make an offer on this one

https://www.ebay.com/itm/MBA033-17-B...0/192653100441

Originally Posted by SuhaibD98

Is there anyway i can confirm that I have a k-can2 for my controller??

What are the exact colors of the wires and stripes going to the iDrive controller?

The better question would be if you actually have a touch controller.

[SuhaibD98]

Originally Posted by IK6SPEED

You are determined to make it harder and more expensive for yourself than it has to be, huh?

You purchase the y adapter I listed above this ecu

https://www.ebay.co.uk/itm/BMW-F20-F...4/123350407250

What are the exact colors of the wires and stripes going to the iDrive controller?

The better question would be if you actually have a touch controller.

Because I'm retrofitting the NBT

and if i was to go with your method would it mean purchasing that y splitter cable you sent and this harness instead?

https://rover.ebay.com/rover/0/0/0?m...2F191882588826

And yes I've got a touch controller

and if i was to use that method the only thing that won't work is the touch features, that's all right

[IK6SPEED]

Originally Posted by SuhaibD98

Because I'm retrofitting the NBT

and if i was to go with your method would it mean purchasing that y splitter cable you sent and this harness instead?

https://rover.ebay.com/rover/0/0/0?m...2F191882588826

And yes I've got a touch controller

and if i was to use that method the only thing that won't work is the touch features, that's all right

You stated you were trying to add touch. You don’t think that was an major detail you should have stated upfront?

[SuhaibD98]

Originally Posted by IK6SPEED

You stated you were trying to add touch. You don’t think that was an major detail you should have stated upfront?

Would that make a huge difference? Wiring should be the same