05-09-2019, 04:30 AM | #1 |
New Member
4
Rep 18
Posts |
Modifying items in FEM_BODY module
I found out that in the FEM_BODY module (30D0 RemoteControl section) two items are -most likely- related to the TPMS system:
a) RC_CHANNEL_SEL_RKE_RDCI; b) RC_LIMIT_HF_FIELDSTRENGTH. In the F3x's with standard equipped TPMS, bullet item a has a value of 'Werte_07 = 07' (channels 1, 2 and 3) and bullet item b has a value of 'Werte_00h = 00'. I currently have these values: Bullet item a ='Werte_03 = 03' (channels 1 and 2). Bullet item b = 'Werte_69h = 69'. It seems item a triggers a new channel to be monitored. Am not quite sure though what item b does. The comment section says some things about HF fieldstrength. Perhaps the tolerances of the (acceptable) measured figures are lowered? Anyone got an idea what these options do/ mean? And has anyone got a clue if I can change these values in my car to the above mentioned ones without any risk? |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|