[cfm56d7b]

Any recommendations?

[cfm56d7b]

Originally Posted by cfm56d7b

Any recommendations?

Bump. Any and all insights appreciated.

[Dova]

Hi,

Im relatively new to the DFW area but I was able to find these guys in Coppell who are awesome. The spot is called Bimmer Motor Specialist (BMS) in Coppell, TX. They have been getting me right every since ive taken my 440i in after moving to Dallas. Its a bit out of the way of Frisco but it is 100% worth the drive if you want qualified and passionate mechanics to work on your vehicle. I really could not recommend them enough.

Hope this helps!

[cfm56d7b]

Originally Posted by Dova

Hi,

Im relatively new to the DFW area but I was able to find these guys in Coppell who are awesome. The spot is called Bimmer Motor Specialist (BMS) in Coppell, TX. They have been getting me right every since ive taken my 440i in after moving to Dallas. Its a bit out of the way of Frisco but it is 100% worth the drive if you want qualified and passionate mechanics to work on your vehicle. I really could not recommend them enough.

Hope this helps!

Super helpful. BMS is on my radar as well. Any experience with https://mporiumbmw.com/ between Frisco and McKinney?

[cfm56d7b]

Originally Posted by Dova

Hi,

Im relatively new to the DFW area but I was able to find these guys in Coppell who are awesome. The spot is called Bimmer Motor Specialist (BMS) in Coppell, TX. They have been getting me right every since ive taken my 440i in after moving to Dallas. Its a bit out of the way of Frisco but it is 100% worth the drive if you want qualified and passionate mechanics to work on your vehicle. I really could not recommend them enough.

Hope this helps!

By the way, my previous car was also 2017 440i GC, one of the best cars I've owned.

[Jvac]

I tried calling mporium once. Nice guys but admitted they were far too busy to handle my job at the time. That's been a problem with any of the indy shops I've found around the Frisco area. Most don't even call back. What do you need fixed?