[340xdriveallentown]

Thinking about ordering set of VS forged wheels. Not gonna track so no need to discuss if they are really forged.

I think the value is in ability customize width, offset, color.

Looking for suggestions for my 340 xdrive sedan currently lowered on eibach prokit.

maybe squared set of 20x9. offset for flush? tire size?

[alohasurftoad]

although these are 19's. this is where the tire and at +29 offset and 255 width will be on you car. https://f30.bimmerpost.com/forums/sh....php?t=1595314

if you like it, get 20x9 +30 with 255/35/19 square

personally, i'd prefer slightly less poke, so i'd get 20x9 +35 with 255/35/19.

[340xdriveallentown]

Thanks Alohasurftoad. I am interested in these wheels bc of another of your posts.

so what would be flush without poke...et 33?

same offset front and rear?

[alohasurftoad]

Originally Posted by 340xdriveallentown

Thanks Alohasurftoad. I am interested in these wheels bc of another of your posts.
so what would be flush without poke...et 33?
same offset front and rear?

it's hard to say because the car in the thread is lowered and when you lower it, it adds negative camber and tucks the upper shoulder slightly which helps the appearance. also, different brands and models of tires may nominally be the same size but have different overall cross section shape and is a variable in appearance as well.

EDIT, just read yours is lowered on eibachs

splitting the difference at +33 should be fine.

since you are square, having the same offset would you afford you rotating them however you desire. i'd rock them this way.