Is it possible to clear check engine codes with Esys / an ENET cable?

shawnsheridan · 12-17-2018, 09:00 AM

Quote:

Originally Posted by pirrup

Hi shawn,

Can you please send me the link to tool32 also?

Thanks!

PM sent.

Hege01 · 01-31-2019, 07:00 AM

Hi Shawn,

can I please also get the link?

Thanks.

Marek

shawnsheridan · 01-31-2019, 07:01 AM

Quote:

Originally Posted by Hege01

Hi Shawn,

can I please also get the link?

Thanks.

Marek

You cannot Send or Receive PM's yet. Send me one when you can.

Hege01 · 01-31-2019, 01:18 PM

Hi Shawn,
could you please, try now?

Thank you.

Marek

shawnsheridan · 01-31-2019, 03:39 PM

Quote:

Originally Posted by Hege01

Hi Shawn,
could you please, try now?

Thank you.

Marek

I said send a PM.

PM sent.

thekoukimonster · 03-08-2019, 11:19 AM

Hi there, could you please send me a link to tool 32 also, will be appreciated.

shawnsheridan · 03-08-2019, 11:59 AM

Quote:

Originally Posted by thekoukimonster

Hi there, could you please send me a link to tool 32 also, will be appreciated.

PM sent.

jeppe777 · 03-24-2019, 01:42 PM

Hi, please can you pm the tool

jeppe777 · 03-24-2019, 01:43 PM

Can you also send me the latest esys

Ali0056 · 07-18-2019, 09:20 PM

Can I please get the link to Tool32?
Thanks!

shawnsheridan · 07-18-2019, 10:49 PM

Quote:

Originally Posted by jeppe777

Hi, please can you pm the tool

Quote:

Originally Posted by jeppe777

Can you also send me the latest esys

PM sent.

shawnsheridan · 07-18-2019, 10:49 PM

Quote:

Originally Posted by Ali0056

Can I please get the link to Tool32?
Thanks!

I replied to your same PM.

joq3 · 08-27-2019, 07:04 AM

Can you PM Tool32 too?

Thank you!

shawnsheridan · 08-27-2019, 08:53 AM

Quote:

Originally Posted by joq3

Can you PM Tool32 too?

Thank you!

PM sent.

Stef80 · 09-21-2019, 04:44 PM

Good evening Shawn,
I have an old 2015 enet cable. Do you think it is ok or do I have to get a new one?
Also, could you sent me ways an tool32 links please?
Thank you very much.

shawnsheridan · 09-21-2019, 04:47 PM

Quote:

Originally Posted by Stef80

Good evening Shawn,
I have an old 2015 enet cable. Do you think it is ok or do I have to get a new one?
Also, could you sent me ways an tool32 links please?
Thank you very much.

Cable is unchanged. PM sent.

Stef80 · 09-21-2019, 05:02 PM

Thank you again. Do you also have esys link? Do I need esys to clear errors or only tool32?

shawnsheridan · 09-21-2019, 05:03 PM

Quote:

Originally Posted by Stef80

Thank you again. Do you also have esys link? Do I need esys to clear errors or only tool32?

Either can clear errors. PM sent.

Stef80 · 09-22-2019, 05:41 AM

Can I ask for a little more help?
I installed everything and did the rearm procedure, set the right series vehicle (f20), changed the date within the suggested timeframe (27/12/2018) but as can be seen in the photo I can not connect in the ECU, although the vin in the corresponding cell is correct.
What might have done wrong?

https://www.imageshack.us/i/pma1FYTEj

shawnsheridan · 09-22-2019, 09:15 AM

Quote:

Originally Posted by Stef80

Can I ask for a little more help?
I installed everything and did the rearm procedure, set the right series vehicle (f20), changed the date within the suggested timeframe (27/12/2018) but as can be seen in the photo I can not connect in the ECU, although the vin in the corresponding cell is correct.
What might have done wrong?

https://www.imageshack.us/i/pma1FYTEj

You have no Connection Targets.

If the "Open Connection" window under "Target" is empty (no targets), verify the following:

That the "psdzdata" folder is installed properly (From the PSdZData_Lite or PSdZData_Full extraction, copy the "psdzdata" folder to "C:\Data" (i.e. "C:\Data\psdzdata")
That the psdzdata chassis folders each have an empty "dist" folder. Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:
- C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\I001\I001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\K001\K001_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\KE01\KE01_xx_xx_xxx\od x\dist
- C:\Data\psdzdata\mainseries\RR01\RR01_xx_xx_xxx\od x\dist
The the E-Sys "Options" => "Settings" => "Directories => Data: path" is set properly (e.g. "C:\Data")

Stef80 · 09-23-2019, 11:42 AM

In the main series list, for the f20 1 series I choose f010?

shawnsheridan · 09-23-2019, 11:43 AM

Quote:

Originally Posted by Stef80

In the main series list, for the f20 1 series I choose f010?

No. You would choose F020.

01-31-2019, 07:00 AM	#486
Hege01 Registered 0 Rep 2 Posts Drives: BMW 320d GT XD, BMW 120d XD Join Date: Jan 2019 Location: Bratislava iTrader: (0)	tool32 Hi Shawn, can I please also get the link? Thanks. Marek
	Appreciate 0 Quote

01-31-2019, 01:18 PM	#488
Hege01 Registered 0 Rep 2 Posts Drives: BMW 320d GT XD, BMW 120d XD Join Date: Jan 2019 Location: Bratislava iTrader: (0)	tool32 Hi Shawn, could you please, try now? Thank you. Marek
	Appreciate 0 Quote

03-08-2019, 11:19 AM	#490
thekoukimonster Registered 0 Rep 1 Posts Drives: Bmw f30 320d Join Date: Mar 2019 Location: Klerksdorp iTrader: (0)	Hi there, could you please send me a link to tool 32 also, will be appreciated.
	Appreciate 0 Quote

03-24-2019, 01:42 PM	#492
jeppe777 Private 16 Rep 70 Posts Drives: F30 335i Join Date: Aug 2013 Location: SA iTrader: (0)	Hi, please can you pm the tool
	Appreciate 0 Quote

03-24-2019, 01:43 PM	#493
jeppe777 Private 16 Rep 70 Posts Drives: F30 335i Join Date: Aug 2013 Location: SA iTrader: (0)	Can you also send me the latest esys
	Appreciate 0 Quote

07-18-2019, 09:20 PM	#494
Ali0056 New Member 3 Rep 21 Posts Drives: 2013 335i x-drive Join Date: Feb 2017 Location: Calgary, Canada iTrader: (0)	Can I please get the link to Tool32? Thanks!
	Appreciate 0 Quote

08-27-2019, 07:04 AM	#497
joq3 Second Lieutenant 105 Rep 265 Posts Drives: BMW 328i F30 M/T -13 Join Date: Jan 2016 Location: Sweden iTrader: (0)	Can you PM Tool32 too? Thank you!
	Appreciate 0 Quote

09-21-2019, 04:44 PM	#499
Stef80 New Member 0 Rep 10 Posts Drives: F20 120i msport auto Join Date: Nov 2015 Location: Greece iTrader: (0)	Good evening Shawn, I have an old 2015 enet cable. Do you think it is ok or do I have to get a new one? Also, could you sent me ways an tool32 links please? Thank you very much.
	Appreciate 0 Quote

09-21-2019, 05:02 PM	#501
Stef80 New Member 0 Rep 10 Posts Drives: F20 120i msport auto Join Date: Nov 2015 Location: Greece iTrader: (0)	Thank you again. Do you also have esys link? Do I need esys to clear errors or only tool32?
	Appreciate 0 Quote

09-22-2019, 05:41 AM	#503
Stef80 New Member 0 Rep 10 Posts Drives: F20 120i msport auto Join Date: Nov 2015 Location: Greece iTrader: (0)	Can I ask for a little more help? I installed everything and did the rearm procedure, set the right series vehicle (f20), changed the date within the suggested timeframe (27/12/2018) but as can be seen in the photo I can not connect in the ECU, although the vin in the corresponding cell is correct. What might have done wrong? https://www.imageshack.us/i/pma1FYTEj
	Appreciate 0 Quote

09-23-2019, 11:42 AM	#505
Stef80 New Member 0 Rep 10 Posts Drives: F20 120i msport auto Join Date: Nov 2015 Location: Greece iTrader: (0)	In the main series list, for the f20 1 series I choose f010?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search