[alexcys]

Originally Posted by shawnsheridan

No. Maybe it was due to low voltage. I have no idea on charger. Just be sure it's 50+ Amps continuous.

Hi Shawn,

You are right. It is probably because of low voltage. I charged the car battery overnight and re-flashed DKOMBI2 this morning and it can be completed within 10 minutes. Now the car is at least drivable but with following issues / alerts:
- Auto PDC failure (the sensors around the cars are not functioning but the rear view camera can be shown)
- Driver assistance restricted (Pedestrian alert, Front-end collision warning)
- Driving stabilization restricted
- Air con not working (only hot air come out)
- Map is not loaded (Is it because of NBT's country code?)

I guess these should be fixed when I flash the remaining ECUs to the same level. Am I correct? Below is the screenshot of the latest TAL:
https://drive.google.com/file/d/1yYa...ew?usp=sharing

I will definitely wait for the PSU to flash the remaining ECUs.
Thanks for your help.

[shawnsheridan]

Originally Posted by alexcys

Hi Shawn,

You are right. It is probably because of low voltage. I charged the car battery overnight and re-flashed DKOMBI2 this morning and it can be completed within 10 minutes. Now the car is at least drivable but with following issues / alerts:
- Auto PDC failure (the sensors around the cars are not functioning but the rear view camera can be shown)
- Driver assistance restricted (Pedestrian alert, Front-end collision warning)
- Driving stabilization restricted
- Air con not working (only hot air come out)
- Map is not loaded (Is it because of NBT's country code?)

I guess these should be fixed when I flash the remaining ECUs to the same level. Am I correct? Below is the screenshot of the latest TAL:
https://drive.google.com/file/d/1yYa...ew?usp=sharing

I will definitely wait for the PSU to flash the remaining ECUs.
Thanks for your help.

I won't speculate. I'd flash them all and see what you end up with and go from there.

[alexcys]

Originally Posted by shawnsheridan

I won't speculate. I'd flash them all and see what you end up with and go from there.

Hi Shawn,

I got the PSU today and flashed the remaining ECUs. Now only 2 problems left:

1. NBT map cannot be loaded - I believed it’s because of fake FSC as I used Easy USBCoding to activate carplay using USB before and I found from another thread that you have helped others to resolve the issue. Can I guide me through?

2. Engine light - I guessed it is about airbag as I have flashed ACSM. I’ll check with ISTA tomorrow as I’m too tired right now.

Thanks very much for your help.

[shawnsheridan]

Originally Posted by alexcys

Hi Shawn,

I got the PSU today and flashed the remaining ECUs. Now only 2 problems left:

1. NBT map cannot be loaded - I believed it’s because of fake FSC as I used Easy USBCoding to activate carplay using USB before and I found from another thread that you have helped others to resolve the issue. Can I guide me through?

2. Engine light - I guessed it is about airbag as I have flashed ACSM. I’ll check with ISTA tomorrow as I’m too tired right now.

Thanks very much for your help.

1. You need solution from your Vendor, which must be ENET based, not USB.

2. Need to LOCK ACSM with ISTA or Tool32.

[alexcys]

Originally Posted by shawnsheridan

1. You need solution from your Vendor, which must be ENET based, not USB.

2. Need to LOCK ACSM with ISTA or Tool32.

Hi Shawn,

I contacted the vendor about the navigation issue and they asked me to buy the ENET solution. I was given a tool called FeatureInstaller7.exe and that can patch CarPlay with navigation enabled. When I ran the tool again to restore OEM FSC, the navigation failed to load again. I asked the vendor about this and they simply asked me to retry and retry and eventually ignored me.

I suspected the FSC the tool backed up to my desktop was a fake one so it won't restore to OEM FSC. I have a recall letter and I need to bring my car back to the dealer. Do you have any ideas for me to restore to OEM FSC?

Thanks.

[shawnsheridan]

Originally Posted by alexcys

Hi Shawn,

I contacted the vendor about the navigation issue and they asked me to buy the ENET solution. I was given a tool called FeatureInstaller7.exe and that can patch CarPlay with navigation enabled. When I ran the tool again to restore OEM FSC, the navigation failed to load again. I asked the vendor about this and they simply asked me to retry and retry and eventually ignored me.

I suspected the FSC the tool backed up to my desktop was a fake one so it won't restore to OEM FSC. I have a recall letter and I need to bring my car back to the dealer. Do you have any ideas for me to restore to OEM FSC?

Thanks.

Only way is to flash EVO, and then manually load each OEM FSC Code.

[smereces]

hello all, looking for the newest Esys and psdzdata please and thank you.

[shawnsheridan]

Originally Posted by smereces

hello all, looking for the newest Esys and psdzdata please and thank you.

PM sent.

[smereces]

Originally Posted by shawnsheridan

PM sent.

thks

[razor2006]

hello, I am also looking for the newest Esys and psdzdata please and thanks!

[shawnsheridan]

Originally Posted by razor2006

hello, I am also looking for the newest Esys and psdzdata please and thanks!

Your Receive PM function is disabled. PM me when working.

[razor2006]

Originally Posted by shawnsheridan

Your Receive PM function is disabled. PM me when working.

Will do, thanks!

[myszano1]

[QUOTE=shawnsheridan;29409623]

Hi nthere, can you pm me latest data for esys please.
Regards

[shawnsheridan]

Originally Posted by myszano1

Hi there, can you pm me latest data for esys please.
Regards

PM sent.

[AzzaF30]

Hi

Is it possible to get the latest psdz data files?.

Thanks

[shawnsheridan]

Originally Posted by AzzaF30

Hi

Is it possible to get the latest psdz data files?.

Thanks

PM sent.

[G30-Mess]

Hi, I think i need a little help - sorry for asking.

installed esys and have the pzdata lite files installed.

connected to car and to edit FDL I am receiving a C157 error:

An error occurred while processing the EST file "C:\E-Sys\Code Away.est". See details for more information. [C157]

EstCmDocumentCorruptException: SAXError during parsing <Error Parsing EST file; error element found.>


__________________________________________________ ___
com.bmw.esys.commons.exception.EsysException: An error occurred while processing the EST file "C:\E-Sys\Code Away.est". See details for more information. [C157]
at com.bmw.esys.commons.SecurityHandler.openEst(Secur ityHandler.java:76)
at com.bmw.esys.gui.control.EsysController.openModule (EsysController.java:162)
at com.bmw.esys.gui.svt.SvtCompareController.editFdl( SvtCompareController.java:1180)
at com.bmw.esys.gui.svt.SvtCompareView$EditFdlAction. doActionPerformed(SvtCompareView.java:361)
at com.bmw.esys.gui.AbstractView$AbstractGuiAction.ac tionPerformed(AbstractView.java:234)
at javax.swing.AbstractButton.fireActionPerformed(Abs tractButton.java:2022)
at javax.swing.AbstractButton$Handler.actionPerformed (AbstractButton.java:2348)

[shawnsheridan]

Originally Posted by G30-Mess

Hi, I think i need a little help - sorry for asking.

installed esys and have the pzdata lite files installed.

connected to car and to edit FDL I am receiving a C157 error:

An error occurred while processing the EST file "C:\E-Sys\Code Away.est". See details for more information. [C157]

EstCmDocumentCorruptException: SAXError during parsing <Error Parsing EST file; error element found.>


__________________________________________________ ___
com.bmw.esys.commons.exception.EsysException: An error occurred while processing the EST file "C:\E-Sys\Code Away.est". See details for more information. [C157]
at com.bmw.esys.commons.SecurityHandler.openEst(Secur ityHandler.java:76)
at com.bmw.esys.gui.control.EsysController.openModule (EsysController.java:162)
at com.bmw.esys.gui.svt.SvtCompareController.editFdl( SvtCompareController.java:1180)
at com.bmw.esys.gui.svt.SvtCompareView$EditFdlAction. doActionPerformed(SvtCompareView.java:361)
at com.bmw.esys.gui.AbstractView$AbstractGuiAction.ac tionPerformed(AbstractView.java:234)
at javax.swing.AbstractButton.fireActionPerformed(Abs tractButton.java:2022)
at javax.swing.AbstractButton$Handler.actionPerformed (AbstractButton.java:2348)

You are using an old outdated E-Sys Launcher with an expired .est Token. PM sent.

[Rollthedice]

Hi all,

I am hoping someone can help me with this…I just unlocked apple car play, lifetime maps FSC, mirroring and VIM by buying the Feature Installer code and applying the patch to the vehicle. However, I noticed due to the i-Step in my F30 (17-03-505), I do not have fullscreen Apple Car play. If I upgrade my vehicle’s firmware to 20-11-540 or 21-..-… or 22-..-…, I know that I can reapply the Feature Installer patch but will I lose my OEM FSC’s for Xm radio, voice recognition, Bluetooth audio and some of the other features which were already in my F30 before applying the Feature Installer patch?

[shawnsheridan]

Originally Posted by Rollthedice

Hi all,

I am hoping someone can help me with this…I just unlocked apple car play, lifetime maps FSC, mirroring and VIM by buying the Feature Installer code and applying the patch to the vehicle. However, I noticed due to the i-Step in my F30 (17-03-505), I do not have fullscreen Apple Car play. If I upgrade my vehicle’s firmware to 20-11-540 or 21-..-… or 22-..-…, I know that I can reapply the Feature Installer patch but will I lose my OEM FSC’s for Xm radio, voice recognition, Bluetooth audio and some of the other features which were already in my F30 before applying the Feature Installer patch?

I don't understand the question. If you flash Head Unit, and Rerun Feature Installer, you will have the same exact thing you have now, which is a patched EVO with Custom FSC Codes.

[Rollthedice]

I apologize if I am not making sense. I am new to this and in the process of gathering all the necessary information online to familiarize myself with the terminology and the esys software. Essentially, what I am wondering is, if I upgrade my bmw to the latest software (istep/firmware) via Esys, will my OEM (fsc?) features that came with the vehicle from factory carry over when the vehicle is updated or do I have to code everything in manually with Esys? My original map data in the vehicle was also from 2016 but I have updated my maps to 2022- do I have to reinstall the new map data again after the istep upgrade?

[shawnsheridan]

Originally Posted by Rollthedice

I apologize if I am not making sense. I am new to this and in the process of gathering all the necessary information online to familiarize myself with the terminology and the esys software. Essentially, what I am wondering is, if I upgrade my bmw to the latest software (istep/firmware) via Esys, will my OEM (fsc?) features that came with the vehicle from factory carry over when the vehicle is updated or do I have to code everything in manually with Esys? My original map data in the vehicle was also from 2016 but I have updated my maps to 2022- do I have to reinstall the new map data again after the istep upgrade?

If you flash EVO, you will wipe current EVO Patch, but leave the Custom FSC Codes, which will all be Rejected until you rerun Feature installer. Coding will be factory original based on FA until you rerun Feature installer. Current Map Data will remain in place.