08-31-2022, 05:34 PM | #1 |
Private
23
Rep 66
Posts |
FS: (NJ) Dinan Lowering Springs for F32 435/440 *xdrive* w/ Bump Stops
I have for sale Dinan lowering springs and bump stops (supplemental ride quality and handling kit). The springs are part number D100-0920. These are still new and were never installed, still in the plastic. Asking for $350 Shipped for the set. I take Paypal G&S or Venmo G&S, I’ll pay the fees. BEFORE YOU BUY!!!!! This is a fair warning before you purchase this set. To make a long story short, this was originally purchased in 2015 for an M235i. Box it came in was labelled M235 with that part number above. You run that part number on Dinan's website and it comes up for an F32 4 series xdrive. I spoke with Dinan's technical service and this is what they came up with. This was the original part number for the M235, but due to fitment issues, they redesigned the springs for the M235 and changed part numbers. These were originally made for the F32 4 series xdrive. Thus I was recommended to sell these parts for the F32. The same goes for the bump stops. The pictures below will have part numbers for front and rear springs. They do match the same part numbers for the F32 4 series xdrive. I got the OKAY from Levi @ Dinan technical support to send our email chain to anyone interested. Also he said he has no problems if anyone wants to reach out to him for confirmation Last edited by JoyRin; 09-16-2022 at 01:35 PM.. Reason: Took away g&s fees, lowered price, and added confirmation with levi |
09-06-2022, 11:10 AM | #2 |
Enlisted Member
14
Rep 36
Posts
Drives: F32 435xi
Join Date: Nov 2019
Location: Philadelphia
|
Sent you a pm
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|