01-16-2021, 02:17 PM | #1 |
Private First Class
45
Rep 121
Posts |
Tailgate wont shut completly after install if reverse camera
Help please, i have installed reverse camer on my f34 and i remember i moved tailgate up and down by hand during install when taking off and reinstalling trim.
First when i tried to shut boot via button on the tailgate it would come down then stopped about 10cm from the latch and went back up slightly, i tried to shut manually and felt resistance almost like trim was not in its place resisting from boot shutting. So i pushed hard down and managed to shut the boot. Next day i opened it and it shut completely. Other time it just openens but will not shut all the way. The trim is deff in place i checked everything i touched during install. Maybe tgere is reset or re-learn function for the boot as i moved it up and down and something jumped a few gears, there is no crunching or grinding sounds it just wont shut, its like its coming down then resistance stops it and it goes back up slightly like an inch. Any suggestions? Thank you. |
01-16-2021, 03:06 PM | #2 |
Private First Class
45
Rep 121
Posts |
Ive been trying to figure this out for past week and today in my head i was thinking there must be something in the way, remembered Trunk cover panel so looked online video made by bmw cover panel stowing it away and seen a small lip i was like darn it cant be that simple! Went to the car and it was it i installed trim panel on wrong way round hence it was intermittent.
As per image you can see overlaping lip of panel is wrong way round |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|