05-28-2019, 01:38 PM | #1 |
New Member
11
Rep 23
Posts |
Europe Next West 2019-2 Update Problem - Connect USB 1
I uploaded the files to the usb disk with folders 1, 2, 3, 4 and files config.nfm, NBT_ECE_101153.3.111.pkg and NBT_ECE_101153.3.111.pkg.sig).
The usb disk is fat32 64 gb. But the car says "Please connect the USB device 1 to start the update." Anybody else could help me please? Thanks a lot in advance! |
05-29-2019, 05:31 PM | #2 |
Private First Class
31
Rep 120
Posts |
I have version 2019-1 and after extraction I got similar file structure as yours, only difference is I have 5 folders instead of 4 that you have.
This looks weird as for previous updates (CIC/Premium Maps) I only had 1 folder and 1 cfg file. I am going to move contents of all folder 1-5 into top level folder and test. I will report back if it solves the issue. Can you please PM me your source for 2019-2? |
Appreciate
0
|
06-02-2019, 04:13 PM | #4 |
Private First Class
31
Rep 120
Posts |
Hi I finally managed to update my maps to 2019-1. I formatted my USB to FAT32 with MBR partition table.
I suggest that you check folder 1 as something might be missing or corrupt in that. I noticed that during installation each folder is treated as like it is a separate USB. I say this because the title of the update progress status changed from USB 1 to USB 2 ... USB 5 which is same as number of folders I had. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|